Jovabra

Same error. My log file. Succes and regards Log.txt

Fuell loaded and start the sim with ENG running. Battery on failure menu is 100% but no joy. All indications are "dead

I load the fuel etc. with the basic XPLANE system but i have no BAT pwr and GRND power all are "dead" Unable to start the APU so what do i wrong. Also the selections in the configurations menu doesn't work. Any help about this problem. Regards

Hi all, I need XPUIPC for my CFY motorized throttle. Somewhere i have an old version and will instal it to test it. Tregards

For your info. I have the CFY Motorized Throttle Quadrant and no problems. The XPUIPC is version is 2.0.5.23. Regards Jo va Bra

Hi, I restarted Fly WithLua (due to the latest update) and everything is now working normal. Thanks and regards J

I have a landing gear lever with an up and dwn position. In the button section i assign the Landing gear up and Landing down buttons but it doesn't work. Only the "Landing gear toggle" is functional. Is there another option to activate the seperate up/dwn function and not only the togle function Jo va Bra

I have installed the latest update but i have no sounds in the cockpit. If i open the cockpit door and start the groundpower unit i can hear it. If i closed the door no sound, only some cracking sound. Same if i started the engine and the engine is active. Is there a sort of mute funtion. I have no sound problems with other aircraft. Regards

Hi Mark, I have the BRUNNER yoke so what is your problem with the trim function in this aircraft. For example; i have only trouble withe the ZIBO mod 737-800. If i disconect the Auto Pilot the aircraft is total out of trim. If i disconnect the AP the aircraft dives like a jetfighter. Regards

English version.

Hi Litjan, All different Boeing fight sims (X-plane and FSX-Prepar3/4D) i have are working i mention. This flightsim is the only different one. Thanks for your reply. Regards

Hi all, In the most B737 aircrafts you can check your inserted route in the MAP display via the STEP function in the LEG page before the INS is completely aligned. To check the route you must to wait.even when the HSI rotary switch is in the PLAN position. For me this is a abnormal situation if i compare it with other Boeing sim's Regards Jo va Bra

What is your problem? Jo va bra

I am also a happy owner of the Brunner CLS yoke and i like it very much. It needs some fine tuning for different aircraft types. If you have any suggestions pls let me know. I have also ordered the brake/rudder pedals. Regards John

Cameron did you read my story about: "After update strange instruments display"! Is there any solution about this weird problom Regards John

How do real 737 pilots perform a flightcontrol check during the prefight or is this a job for the groundmechanic. Are they going out of the cockpit, i don't think so. 90% of the airliners aircraft have a surface position indicator even the old 747-100/200/300. I'm missing this sort of indication in the this 737. Next update maybe?

Jim, I downloaded the latest installer from X-Aviation. The zip-file nr is 1.02, So far so good. The installation program found an other installed 737 and ask me for a complete uninstall. I conformed. Everything installed fine, but when you check the version number of the software in the FMC you find version 0.8??? If i checked for a earlier update in version 1.01 (for example) they removed the option to select "Verbal Flap Callouts" in the preference menu. But in my 0.8 version still available. I.o.w i installed a older version i.s.o. the latest one. How is that possible? Regards

Nils, Removed the plugins, no result. Keep in mind that version nr 1. working normal. First update working normal and now the second update is the problem. I did not installed other plugins or programs after the 737. If i uninstalled the 737 and performed a clean instal of the first one everythings works normal. I have also an Imac cmptr and installed in the mean time the 737 and performed also the latest update. Everything workes normal. In my Window10 cmptr i see in the cockpit a captain and the first officer sitting in there seats. It's looking very weird and they disturbed the vieuw of the instruments.

I disabled my antivirus and firewall and performand again a successful hotfix download (84 files) and installation. See picture. See my log files for further investigations. Regards Cycle Dump.txt Log.txt GizmoLog.txt

Morten, I loaded the 767-300 and the Airfoillabs 172 and all looking/working normal. It is also impossible to rotate and activated any kind of switches/knobs. All are frozen. Aircraft is complete unusable. I moved the aircraft to the hangar for a complete overhaul and in the meantime i used my "spare" 767-300 plane. On the picture you can see the complete misalignment of the engine indicators. Regards John Ps; Is it possible to remove the unwanted members in the cockpit? :-)

M, I re-downloaded again a new file from X-Aviation. It looks that it is updated to version1.02. The zip file name is also 1.02. i performed a new install and during the installation they removed the old one. Everything looks normal BUT you can read in the FMC the version of the installed software. The installed software gives V0.8. In my opinion there is a wrong and old file in the X-Aviation software shop. After update again to 1.02 same problem happend. Regards John

M, I successful updated twice but no joy John

Hi all, After the latest update i have a strange 3d cockpit view/display. I'm looking at the (occiput)head of a pilot's and the 'out/in' zoom function doesn't work enough. Also a lot of engine displays are distorted even some mcp display's. See picture. I'm missing also the configuration opportunities on the lefthand side of the screen. So for me not a successful update. Regards John

Thanks for your quick reply. I will continue to observe John

In a short flight i observe many times that the 3 red landing gear warning lights came on for about a minute. Not onle once bute several times. I have no other failures as hydraulics/lamdinggear handle etc. Regards John