80 replies to this topic

[philipp]

I still have no clear picture of your problem.
Please post your Log.txt and a screenshot.

Philipp

[Cameron]

TOBS, on 25 January 2012 - 05:58 PM, said:

after removing all plugins I do not see PFD and EFIS
Tom

Philipp was not asking you to remove plug-ins, Tom. He was asking you to leave the SID/STAR data alone....clean.

[TOBS]

philipp, on 25 January 2012 - 06:12 PM, said:

I still have no clear picture of your problem.
Please post your Log.txt and a screenshot.

Philipp

In the moment itis clear - no PFD no EFIS no other plugins then the default and gizmo / Shrinkwarp

Somtimes after loading I see PFD and EFIS but then I cannot press the POS button to align the artificila horizon on the pfd.

Just now I had the phenomen that I saw PFD and EFIS for a short while and then - dark

I attached screenshots and log file

Regards Tom

Attached Files

•  no pfd.PNG   1.7MB   13 downloads
•  Log.txt   244.05K   1 downloads
•  POS Enter.PNG   1.32MB   11 downloads

Edited by TOBS, 25 January 2012 - 06:32 PM.

[TOBS]

Cameron, on 25 January 2012 - 06:16 PM, said:

Philipp was not asking you to remove plug-ins, Tom. He was asking you to leave the SID/STAR data alone....clean.

I did not touched that nab folder it is a clean and untouched installation!
Regards Tom

[philipp]

TOBS, on 25 January 2012 - 06:32 PM, said:

Somtimes after loading I see PFD and EFIS but then I cannot press the POS button to align the artificila horizon on the pfd.

I hate to say this, but this sounds like a user error - did you put the IRS 1 and 2 into align mode before entering the coordinates?

Quote

Just now I had the phenomen that I saw PFD and EFIS for a short while and then - dark

This sounds exactly like the copy protection kicking in. Cameron, your turn

Edited by philipp, 25 January 2012 - 07:38 PM.

[TOBS]

Philipp, maybe I am blind but do I find somewhere a manual about the new FMC?
Regards Tom

[schrader501]

Wow, everything looks very fine, but I had to choose X-Plane10 and then switch back to X-Plane9, otherwise X-Plane 9 didn't accept the plane.

But: Very often when I use the CDU (built in), pressing the knobs beside the screen to put a waypoint or something like that in the Flight-Plan, X-Plane crashes completely.

System: Core I7, NVidia GTX 550, 8GB RAM, SSD, Ubuntu Natty

[retiree_caf]

Hope the folks can find the issue on 1.4.1 crashes using SIDs and STARs. I tried everything from re-installing everything and still have the crashes ((

[philipp]

@schrader501 , @retiree_caf:
I need _specific_ descriptions of what you are trying to do, and what you are pressing at the moment it crashes.
"When I press some knobs", or "When using SID and STARs" are not descriptive of what your problem is.

A problem description should include
-the operating system you are using
-the navdata cycle used
-the departure and destination airport
-the planned routing between those
-the SID, Transition, STAR, Transition and Approach at each airport
-the sequence of your entering (do you first enter the route, then the SID, or first the SID, then the route, etc.)
-after the crash, the crash report (crash_log.txt on Windows, crash report from Console.app on Mac)

Philipp

Edited by philipp, 26 January 2012 - 02:54 AM.

[TOBS]

After choosing another Stand on the airport I can not anymore activate GPU. Brakes are on / Batterie ON - What can I do?

Tom

[Japo32]

extrange... try to open the plane again but with engines running in the new parking position.. and see if the GPU can go out.

[schrader501]

Ok!

System is Ubuntu Natty on an I7 8GB
X-Plane 9, CRJ is a clean installation

• Starting from cold and dark
  
• Airport is LSZA (Lugano)
  
• Position is copied to align IRS
  
• APU started, Generator on, Hydraulics etc.
  
• Going to the FPLN-Site
  
• Klick to activate keyboard

or

• Entering with mouse
  
• "CANNE" as SID
  
• Klick on the knob on the FPLN Page beside "TO"
  
• X-Plane is crashing completely
  
• happens with "built-in"-CDU and "html"-CDU

(I know, this isn't correct. The Destination should be entered before,
but this happens too in other situations, like modding the FPLN or clicking the wrong button to insert a hold. One wrong click on a knob beside the CDU-Screen and X-Plane is crashing.)

Sorry about the former unprecise post.

This is a very nice plane, I love it and i can only guess how much work was put in it.


Is there a crash-log on my Ubuntu too?

Greetz
S.
EDVE

[Japo32]

Don't know about linux.. but is supposed you have to have a crash-log.txt when a CTD occurs. It has to be in the main directory of xplane.

All the people that is having the crashes.. could you please try over a demo version. You can install paralell and later delete of a demo version of x-plane. That way we can know if that is because system or plugin inside the CRJ.

Thanks!

[TOBS]

Japo32, on 26 January 2012 - 10:16 PM, said:

extrange... try to open the plane again but with engines running in the new parking position.. and see if the GPU can go out.

Starting ENG ON: GPU switch works
Starting ENG ON and change location: GPU switch does not work

Starting ENG OFF : GPU switch works
Starting ENG OFF and change location: GPU switch does not work

Even I restart the plane on the Airport cannot get the GPU switch to work

Regards Tom

Edited by TOBS, 27 January 2012 - 01:09 PM.

[philipp]

@shrader: On Linux, there is no crash log, but you would be my hero of the day if you could post me a gdb trace: http://forums.x-plan...showtopic=29916

@tobs: Which GPU switch exactly? There is the EXT AC power connect button in the overhead, and the GPU power selector in the CDU

Edited by philipp, 27 January 2012 - 05:40 PM.

[TOBS]

philipp, on 27 January 2012 - 05:25 PM, said:

@shrader: On Linux, there is no crash log, but you would be my hero of the day if you could post me a gdb trace: http://forums.x-plan...showtopic=29916

@tobs: Which GPU switch exactly? There is the EXT AC power connect button in the overhead, and the GPU power selector in the CDU

The GPU selector in the CDU
Reagrds Tom

Edited by TOBS, 28 January 2012 - 11:44 AM.

[schrader501]

GNU gdb (Ubuntu/Linaro 7.2-1ubuntu11) 7.2
Copyright © 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /home/msalling/X-Plane 9/X-Plane-i686...done.
(gdb) run
Starting program: /home/msalling/X-Plane 9/X-Plane-i686
[Thread debugging using libthread_db enabled]
[New Thread 0xb5c30b70 (LWP 2279)]
[New Thread 0xb50b5b70 (LWP 2280)]
[New Thread 0xb4534b70 (LWP 2281)]
[New Thread 0xb39b3b70 (LWP 2282)]
[New Thread 0xb2e32b70 (LWP 2283)]
[New Thread 0xb22b1b70 (LWP 2284)]
[New Thread 0xb1791b70 (LWP 2285)]
Looking for OpenAL here: libopenal.so
Looking for OpenAL here: libopenal.so.1
[New Thread 0xa92fcb70 (LWP 2286)]
Starting thread loader.
IO_Scene of 48,10 (async=0) as 0x9c3fac68
IO_Scene of 48,11 (async=0) as 0x9c3bf098
IO_Scene of 48,12 (async=0) as 0x9c2fa458
IO_Scene of 49,10 (async=0) as 0x9a4a0720
IO_Scene of 49,11 (async=0) as 0x9a8ba728
IO_Scene of 49,12 (async=0) as 0x97aff4b0
Kicking off async tex load.
[New Thread 0x87d9eb70 (LWP 2287)]
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
bt_audio_service_open: connect() failed: Verbindungsaufbau abgelehnt (111)
[New Thread 0x7f59bb70 (LWP 2288)]
[Thread 0x7f59bb70 (LWP 2288) exited]
[New Thread 0x7f59bb70 (LWP 2289)]
[Thread 0x7f59bb70 (LWP 2289) exited]
ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[New Thread 0x7f59bb70 (LWP 2290)]
[Thread 0x7f59bb70 (LWP 2290) exited]
[New Thread 0x7f59bb70 (LWP 2291)]
[Thread 0x7f59bb70 (LWP 2291) exited]
[New Thread 0x94a8eb70 (LWP 2292)]
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server socket
jack server is not running or cannot be started
[Thread 0x94a8eb70 (LWP 2292) exited]
[New Thread 0x7f59bb70 (LWP 2293)]
[New Thread 0x81971b70 (LWP 2294)]
[New Thread 0x80f81b70 (LWP 2295)]
[New Thread 0x80591b70 (LWP 2296)]
[New Thread 0x7ed9ab70 (LWP 2297)]
[New Thread 0x7e599b70 (LWP 2298)]
[New Thread 0x7dd98b70 (LWP 2299)]
[New Thread 0x7d597b70 (LWP 2300)]
[New Thread 0x7c919b70 (LWP 2301)]
[New Thread 0x7bb50b70 (LWP 2302)]
[New Thread 0x7b01bb70 (LWP 2303)]
[New Thread 0x7a81ab70 (LWP 2304)]
VRAM needed: 1243873. Trivial VRAM: 2249728. Packed VRAM: 1572864.
Packed efficiency: 0.790833. Unpacked efficiency: 0.552899.
Queueing tex load for any pending degrees we just forced ourselves to do.
[New Thread 0x6a3ffb70 (LWP 2305)]
LINUX: I saw filesystem type "iso9660", but I wanted "udf"

Program received signal SIGSEGV, Segmentation fault.
0xb7cd26c2 in ?? () from /lib/i386-linux-gnu/libc.so.6
(gdb) ^CQuit
(gdb)


I think the lines above "programm received ..." are not important, but if I could be your hero of the day ...

just a joke, if Ican do anything to help ...

... the CRJ is the love of my life! (Don't tell that to my wife!)

Greetz
S.
(EDVE)

[TOBS]

philipp, on 27 January 2012 - 05:25 PM, said:

@shrader: On Linux, there is no crash log, but you would be my hero of the day if you could post me a gdb trace: http://forums.x-plan...showtopic=29916

@tobs: Which GPU switch exactly? There is the EXT AC power connect button in the overhead, and the GPU power selector in the CDU

The GPU button in the CDU.
OK found it! If I open and close the passenger door at the new stand I am able to use the CDU GPU button again - hm strange....
Regards Tom

[philipp]

schrader501, you missed the all-important step:

Quote

in the gdb console you will see the crash info ("catched SIGSEG blah blah ....").
- NOW you can create the back trace by simply typing in: bt

you just quitted without doing the "bt" before.

Philipp

[TOBS]

Philipp,
as I said I sorted out why I could not use the GPU button in the CDU - this was flying offline without xsquawkbox.
Just now I wanted to do an online flight - but my old problem with your plane occurs again. I restarted the plane, moved locations, opened and closed door so that I can use the CDU GPU button on - AC button on - but the PFD and MAP stays dark. as soon as I remove the xsquawkbox plugins it works again. My win7 64 is a very new setup. I asked about this before I waited for the XP10 updates cause I thought the problem is maybe here but it only occurs with the CRJ200. For me it is a really boaring think this quite expensive software not to use while flying online. What can we do, what can I do...? Has this something to do with the activation, is this maybe an opengl problem - how can we find out?

Maybe an interesting hint - the CDU in the plane is also dark - but it seems to work cause the CDU in my IPAD is working fine. But as I said before PFD EFIS and CDU in the plane are dark with xsquawkbox.

please crj200 developers help in this case.

Regards Tom

Edited by TOBS, 28 January 2012 - 05:37 PM.