Ifikratis Posted March 10, 2019 Report Share Posted March 10, 2019 Hi all, After the latest update the plane does not load correctly. I should mention that I don't have a graphics card installed currently so I use the integrated Intel GPU. I use it to update and install add-ons but I'm not flying currently. However so far I have been updating the TBM normally. This time I see a pure white model in the outside view and in the inside I think that textures are missing, besides I cannot operate any switch or manipulator. I tried uninstalling and reinstalling the latest version 1.1.6 but no luck. All my other add-on planes load normally. Any ideas what could be the reason? Quote Link to comment Share on other sites More sharing options...
Goran_M Posted March 10, 2019 Report Share Posted March 10, 2019 Can you try selecting a different paint, and then re-selecting the default paint? Please post back what happens. Quote Link to comment Share on other sites More sharing options...
Ifikratis Posted March 10, 2019 Author Report Share Posted March 10, 2019 (edited) Hello Goran, Thank you very much for the quick reply. I loaded another paint but still same problem. The only thing that I noticed was that choosing another paint I was able to see the exterior paint, but with white artifacts on the vertical stabilizer. However, the cockpit was still the same: When I load after the default paint again, I see the same behavior as before. White external model and the cockpit still unusable. Could it be a memory problem due to the fact that I currently don't have a GPU installed? In that case maybe its better to wait to receive my GPU and try again. Its only makes me worry because I don't see that with other add-ons, but maybe its something specific that the TBM requires? Didn't happen though with the previous versions. Edited March 10, 2019 by Ifikratis Quote Link to comment Share on other sites More sharing options...
Goran_M Posted March 10, 2019 Report Share Posted March 10, 2019 You're very likely running out of VRAM. The TBM requires at least 2GB of VRAM, and that's with settings set to minimum. Quote Link to comment Share on other sites More sharing options...
Ifikratis Posted March 10, 2019 Author Report Share Posted March 10, 2019 Thank you very much again Goran. This would make sense, so I will not worry for now and wait for my GPU to arrive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.