Jump to content

CTOT not working?


GEL
 Share

Recommended Posts

Dwnloaded latest Saab 340A (1.5 ) for xplane  v10.5

 CTOT no longer works.

My understanding is: the system "kicks in" ~ 62% +  and increases rpm to what is dial in at the preset...

...none of that is happening.

Thoughts?

 

 

 

Link to comment
Share on other sites

CTOT works ok

 

make sure:

1. you engaged both switches and also rotated the knob to desired torque (it engages by 64%, but do not exceed minus 15-20% of selected torque)

2. double check you are not overshooting the CLs MAX position, which is not the end of the travel T/M, it is a detent before. Otherwise the aircraft will have no torque.

 

note: i am XP11.20, can not test under xp10.x

 

hope this helps

Link to comment
Share on other sites

Just did a whole systems check and CTOT does indeed seem to be working just fine.

They even worked with L/R gens off line... surprised by that.

They engage at the 70%+ torque range and am able to dial +/- at the console and arm/disarm

while in torque range.

So I'm at a loss to explain the non events unless it is a loading issue. (?)

Thanks for the response tho' .... cheers

 

Link to comment
Share on other sites

Well...back to the ol' drawing board: For me , this version of the Saab (1.5) appears to be a very unstable model.

Just finished a session where upon as stated before: NO CTOT available.

.. upon arrival: came to a complete stop on rnwy and required TL beyond the flight idle to begin taxi

... tiller disengaged ( i mapped nose wheel hyd to key stroke)

... lost ability to brake ( had left the rnwy at that point so this is a little ambiguous )

... there appears to be an exaggerated  nose up profile to this model

This is not a new model for me in xplane (10.5) ... and I've probably flown this plane 

more than any other in the sim.

Wondering if a reinstall is in order.

Thoughts?

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...