Jump to content
Sign in to follow this  
Chris737

Flight Controls bug V1.5

Recommended Posts

Exactly the same here. I've got this normaly on Ground, everytime, till i made takeoff. But today it was qinflight during Approach... very strange an boring...

Edited by silverchord

Share this post


Link to post
Share on other sites

@Chris737 It's very hard to tell what you were doing in that video.  If you have pedals assigned to the rudder and you move the pedals, or you click on the control box with the mouse and move side-to-side, the rudder pedals are going to animate in the cockpit. If that's not the case then please explain further.

@silverchord  Same..what were you doing at the time this happened?  Do you have hardware assigned to the rudder (pedals) ?  Were you using the mouse and moving it?  Please explain in more detail.

 

Share this post


Link to post
Share on other sites
2 hours ago, Chris737 said:

I do nothing the Controls do itself .....

The Rudder go left and right  the same with the Elivator

Where there windy conditions when this was happening?

Share this post


Link to post
Share on other sites
2 hours ago, JGregory said:

@Chris737 It's very hard to tell what you were doing in that video.  If you have pedals assigned to the rudder and you move the pedals, or you click on the control box with the mouse and move side-to-side, the rudder pedals are going to animate in the cockpit. If that's not the case then please explain further.

@silverchord  Same..what were you doing at the time this happened?  Do you have hardware assigned to the rudder (pedals) ?  Were you using the mouse and moving it?  Please explain in more detail.

 

2 hours ago, JGregory said:

 

@silverchord  Same..what were you doing at the time this happened?  Do you have hardware assigned to the rudder (pedals) ?  Were you using the mouse and moving it?  Please explain in more detail.

 

Well, since i have this Birth, also in XP 10, the Rudder and the Elevator moves from the first secound, the Plane is loaded in the Simulator. So, sitting in the Cockpit after the Flight was loaded, its Cold & Dark. Then i change the View, for exc. Towerview or any else, the Rudder and the Elevator moves up an down. It seems like the moves in the wind. But they moves wild and uncontrolled. I use Saitek Yoke, CH-Pedals and CH-Throttles.

Normaly, it stops, while Takeoff, but today, it was after a normal Flight during the Approach, after i select VS in the Autopilot it starts moving and shaking like this... inflight...

LES_Saab_340A_1.avi

  • Upvote 1

Share this post


Link to post
Share on other sites

I get this a lot - tail waggling and elevator flapping, sitting on the ground at startup. Went to the external view now after removing all ground elements except nose wheel chocks, connecting GPU, and turning on the batteries, external power, nav lights, all 3 avionics systems, arming the emergency lightning and opening the cabin and cargo doors. I don't think any of those are necessary (it'll start flapping immediately), but wanted to be thorough. Edit: had to restart for TrackIR, and went through my setup slowly. At spawn, only the elevator was fluttering; removed the ground elements one by one with no effect. Turned on both batteries and checked - immediately the rudder started its waggling. So whatever's going on is dependent on electrical power and the batteries are sufficient. (I have the GPU connected but external power is not yet enabled on the overhead.)

Location is TNCM parking A4, using X-Plane's built-in real weather. I've attached the METAR.rwx in case it is weather-specific.

In the cockpit view, the pedals move in sync with the rudder movement. Hydraulics look normal for engine off (attached screenshot).

Applying my own pedals does affect the rudder as expected, but the 'random' waggling continues. At full deflection it'll jerk back to what appears to be a perfectly centered position.

The winds are steady at 10.10 (knots, presumably) but variable direction (060 thru 140 according to the METAR, which looks about right for the data outputs).

METAR.rwx

LES_Saab_340A_67.jpg

GizmoLog.txt

Log.txt

Edited by nomdeplume

Share this post


Link to post
Share on other sites

Further to the above post, two videos which hopefully show the behaviour we're trying to describe more clearly.

https://youtu.be/1E_myS6JlJk - showing cockpit and then external views with the control surfaces and flight controls displayed in the data graph window. First neutral controls, then full left rudder followed by full right, repeated for both views.

https://youtu.be/JU_MINjJy80 - showing external view with the weather and flight controls displayed in the data graph window. This video is with neutral controls.

 

Share this post


Link to post
Share on other sites

@nomdeplume  All of the issues you described have been addressed and will be included in the next update.  There is no need for you to report anything further on this. 

Edited by JGregory
  • Upvote 1

Share this post


Link to post
Share on other sites
Just now, JGregory said:

@nomdeplume  All of this issues you described have been addressed and will be included in the next update.  There is no need for you to report anything further on this. 

Great, thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×