Dscho Posted August 4, 2017 Report Share Posted August 4, 2017 (edited) hello, latest version 1.4.1, XP10.51: a while - about 20 seconds - after tuning a frequency into the ADF, the frequency changes back to the value it was before i.e 530. Has anybody of you captains experienced that too? Or did i miss something? Thanks for feedback, Dscho Edited August 4, 2017 by Dscho typo Quote Link to comment Share on other sites More sharing options...
JGregory Posted August 8, 2017 Report Share Posted August 8, 2017 Dscho, I just tested this using Saab v1.4.1 in XP10.52r2 and could not recreate the problem. And, I waited much longer than 20 seconds. If you can give us some more details on exactly what you did when tuning the frequency, using the transfer/mem switch, etc. that would be helpful. Quote Link to comment Share on other sites More sharing options...
Dscho Posted August 8, 2017 Author Report Share Posted August 8, 2017 (edited) Hi JG, thanks for responding! First i have to clarify that ADF 2 works perfectly. It is only ADF1, which shows this problem. The control mode switch is at "ADF", then i dialed in the frequency (327 at LOWL) and move the transfer switch to the "UP" position. The frequency engages and the ADF position pointer of the EHSI points at the correct position. Suspicious is, that the RMI pointer remains at 3 o'clock. Then i did nothing and waited until the ADF frequency flips back, every time to the same value of "530". The time interval is variable between 30 seconds and almost 3 mins. Situation: on ground just after engine startup, i hope this helps Dscho Edited August 8, 2017 by Dscho supplement Quote Link to comment Share on other sites More sharing options...
birdy.dma Posted August 8, 2017 Report Share Posted August 8, 2017 (edited) Can you have an unexpected assignment to a button? Double check all your buttons, also the supposed non assigned ones. Do you use xassign, or a FlyWithLua script to save your assignments? Edited August 8, 2017 by birdy.dma 1 Quote Link to comment Share on other sites More sharing options...
Dscho Posted August 8, 2017 Author Report Share Posted August 8, 2017 (edited) hi birdy, i have FlyWithLua installed, but didn't have any script added to the plugin - everything is default. But i had the suspicion in mind, that FlyWithLua is the culprit. And guess what happened after disabling all the scripts: IT WORKS NOW !!! Now i have to find out, which of those script disadjusts the ADF 1 radio This raises the question: does the Saab 340 really need FlyWithLua? (I don't like FlyWithLua very much) By all means: thank you very much birdy Dscho In the meantime i found it out: it's HUD module test: .... -- do some corrections function radio_limiter() if COM1 < 11800 then COM1 = 11800 end if COM1 > 13697 then COM1 = 13697 end if NAV1 < 10800 then NAV1 = 10800 end if NAV1 > 11797 then NAV1 = 11797 end if ADF1 < 530 then ADF1 = 530 end if ADF1 > 1700 then ADF1 = 1700 end if OBS1 < 0 then OBS1 = 350 end if OBS1 > 360 then OBS1 = 10 end if HDG < 0 then HDG = 350 end ....... Edited August 8, 2017 by Dscho supplement Quote Link to comment Share on other sites More sharing options...
JGregory Posted August 8, 2017 Report Share Posted August 8, 2017 2 hours ago, Dscho said: This raises the question: does the Saab 340 really need FlyWithLua? (I don't like FlyWithLua very much) No, the Saab does not need FlyWithLua to function properly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.