Tom Stian Posted November 29, 2016 Report Share Posted November 29, 2016 (edited) 19 minutes ago, silverchord said: How did you move this Gizmo Window? Ill just grab the window where I marked and move it down. Just make sure you point your mouse at the bottom of the gray bar so you dont conflict with the menu. Edited November 29, 2016 by Tom Stian 1 Link to comment Share on other sites More sharing options...
donoscar Posted November 30, 2016 Report Share Posted November 30, 2016 On 11/28/2016 at 10:45 AM, beep747 said: The APU can be activated in xp11 via Planemaker (standard - systems). Works as before now. Jos On 11/28/2016 at 3:50 PM, Tom Stian said: Thanks for the tips.. I did that and now the APU works. But I noticed that the .acf filesize changed from 2.2MB to 1.1MB . So I hope I dident break anything Maybe its saving in a new format or something that are reducing the size. I have a backup, so lets see if everything is behaving as normal. thanks for this, it does indeed work the issues I encounter though (pardon my specific question, move accordingly if not the right place here) have to do probably with the offset values I use with my triple-monitor configuration: 1. click spots seem to be messed up 2. rotary knobs are not controllable in cockpit if anybody has an idea how to correct, open to test... Link to comment Share on other sites More sharing options...
FSAviator Posted November 30, 2016 Report Share Posted November 30, 2016 Not working for me because the window is located too close to the upper screen edge Link to comment Share on other sites More sharing options...
donoscar Posted November 30, 2016 Report Share Posted November 30, 2016 23 minutes ago, FSAviator said: Not working for me because the window is located too close to the upper screen edge not sure if relevant, but try to put in windowed or full screen mode and see if it helps Link to comment Share on other sites More sharing options...
FSAviator Posted November 30, 2016 Report Share Posted November 30, 2016 The Whole sim or just the panel? - Do you have some keyboard shortcuts (Windows) for me? - I'm really new to X-Plane... - I took over from FSX, a few days ago Thank you 1 Link to comment Share on other sites More sharing options...
cmbaviator Posted December 1, 2016 Report Share Posted December 1, 2016 Sorry to hijack the topic but I need some info: I have appalling performance with the xP11 demo: 25 FPS on ksea on medium Hight setting no FPS boost on everything low. 1440p Gtx980ti 4790k@4.6ghz My GPU was below 50%, it always on 99% on XP10 hence the FPS issue. Plus it looks shit*y I was wondering if the full version is better in terms of performance and graphics ? If yes, where can I buy XP11 knowing that I have the steam xp10 Thks Envoyé de mon iPhone en utilisant Tapatalk Link to comment Share on other sites More sharing options...
Cameron Posted December 1, 2016 Report Share Posted December 1, 2016 6 minutes ago, cmbaviator said: If yes, where can I buy XP11 knowing that I have the steam xp10 X-Plane.com Link to comment Share on other sites More sharing options...
donoscar Posted December 1, 2016 Report Share Posted December 1, 2016 18 hours ago, FSAviator said: The Whole sim or just the panel? - Do you have some keyboard shortcuts (Windows) for me? - I'm really new to X-Plane... - I took over from FSX, a few days ago Thank you in that case, I would not try to experiment too much :-), even for experienced X-Planers Betas remain challenging. We have learned from good source, there is hope that we will get the 733 very soon "enabled" for XP11. If your wish however is to try the ixeg today or even better, yesterday, why not installing the #10 version? Link to comment Share on other sites More sharing options...
culley35 Posted December 2, 2016 Report Share Posted December 2, 2016 can someone give a detailed tutorial about planemaker to have the apu work, i am not new to x-plane but never used x-plane maker before, i am developing new hd scenery with ortho4xp. Link to comment Share on other sites More sharing options...
poodster Posted December 2, 2016 Report Share Posted December 2, 2016 1 hour ago, culley35 said: can someone give a detailed tutorial about planemaker to have the apu work, i am not new to x-plane but never used x-plane maker before, i am developing new hd scenery with ortho4xp. Open the ixeg in plane maker. To go standard - systems - then electrical tab - and you will see a box that you can check which says "auxiliary power unit" . Check that on, save and exit. 1 Link to comment Share on other sites More sharing options...
culley35 Posted December 2, 2016 Report Share Posted December 2, 2016 i am getting the same error and window that pops up like the one above, i can close it but then i can't access the menu bar. Link to comment Share on other sites More sharing options...
Tom Stian Posted December 2, 2016 Report Share Posted December 2, 2016 Just now, culley35 said: i am getting the same error and window that pops up like the one above, i can close it but then i can't access the menu bar. I have to set the BAT switch to ON to get access to the X-Plane menu. Link to comment Share on other sites More sharing options...
culley35 Posted December 2, 2016 Report Share Posted December 2, 2016 i set the plane to turn around and the menu works, but i still get the datarefs string when i start the sim with this aircraft Link to comment Share on other sites More sharing options...
Tom Stian Posted December 2, 2016 Report Share Posted December 2, 2016 (edited) 2 minutes ago, culley35 said: i set the plane to turn around and the menu works, but i still get the datarefs string when i start the sim with this aircraft IXEG 733 is designed for X-Plane 10, so we have to live with that until IXEG make a update for X-Plane 11 And X-Plane 11 is still only beta. Edited December 2, 2016 by Tom Stian 1 Link to comment Share on other sites More sharing options...
Litjan Posted December 3, 2016 Report Share Posted December 3, 2016 Not a promise, but I think we MAY get rid of the gizmo error on startup with one of the next XP11 betas...it is due to some dataref change that Laminar did. I also have some inconsistencies with the pop-out menus, I often can´t access the XP11 toolbar (on top edge), but haven´t found out what is causing it. There are some other minor items, but I think we will be able to conquer those soon after starting the port. Jan 2 Link to comment Share on other sites More sharing options...
dr_nerdrage Posted December 3, 2016 Report Share Posted December 3, 2016 37 minutes ago, Litjan said: Not a promise, but I think we MAY get rid of the gizmo error on startup with one of the next XP11 betas...it is due to some dataref change that Laminar did. I also have some inconsistencies with the pop-out menus, I often can´t access the XP11 toolbar (on top edge), but haven´t found out what is causing it. There are some other minor items, but I think we will be able to conquer those soon after starting the port. Jan Jan, if it helps: the interface interaction issues are definitely not IXEG exclusive. It also seems to happen to various 3rd party complex aircraft (airliners mostly?) such as Flight Factor's add-ons. Link to comment Share on other sites More sharing options...
Litjan Posted December 3, 2016 Report Share Posted December 3, 2016 3 hours ago, dr_nerdrage said: Jan, if it helps: the interface interaction issues are definitely not IXEG exclusive. It also seems to happen to various 3rd party complex aircraft (airliners mostly?) such as Flight Factor's add-ons. Thanks - we will keep investigating, but of course I wouldn´t object if Laminar just fixed it on their side ;-) I do get some autothrottle problems (slow reaction, not setting correct power, hunting back and forth...). Do you see any of that? Cheers, Jan Link to comment Share on other sites More sharing options...
Morten Posted December 3, 2016 Report Share Posted December 3, 2016 (edited) Marshall explains how to temporary overcome a couple of these things in his latest video. (all his videos are excellent btw ) Edited December 3, 2016 by Morten 5 Link to comment Share on other sites More sharing options...
jkonicek Posted December 3, 2016 Report Share Posted December 3, 2016 On 1. 12. 2016 at 4:27 PM, cmbaviator said: Sorry to hijack the topic but I need some info: I have appalling performance with the xP11 demo: 25 FPS on ksea on medium Hight setting no FPS boost on everything low. 1440p Gtx980ti 4790k@4.6ghz My GPU was below 50%, it always on 99% on XP10 hence the FPS issue. Plus it looks shit*y I was wondering if the full version is better in terms of performance and graphics ? If yes, where can I buy XP11 knowing that I have the steam xp10 Thks Envoyé de mon iPhone en utilisant Tapatalk I have the same experience. I have XP11 full version, i7 on 5.1 GHz, GTX 1080, 3x LCD. The graphic performance of XP11 is definitely worse then XP10. I hope for future improvements. Link to comment Share on other sites More sharing options...
Litjan Posted December 3, 2016 Report Share Posted December 3, 2016 43 minutes ago, jkonicek said: I have the same experience. I have XP11 full version, i7 on 5.1 GHz, GTX 1080, 3x LCD. The graphic performance of XP11 is definitely worse then XP10. I hope for future improvements. Well, don´t hope for them to come from us . As a matter of fact, don´t expect to ever get the same performance framerate-wise in XP11 that you had in XP10, but that should be obvious. Cheers, Jan Link to comment Share on other sites More sharing options...
culley35 Posted December 3, 2016 Report Share Posted December 3, 2016 (edited) i don't see how performance could be worse, i am using a 6600k @5 ghz, 32 gb of ddr4 3,000mhz and a msi gtx 1070 and i get around 40fps on the ground and 80fps and above in the air.you must not have something configured incorrect or you have some settings too high, turn your reflections down. Edited December 3, 2016 by culley35 Link to comment Share on other sites More sharing options...
culley35 Posted December 3, 2016 Report Share Posted December 3, 2016 12 hours ago, Litjan said: Not a promise, but I think we MAY get rid of the gizmo error on startup with one of the next XP11 betas...it is due to some dataref change that Laminar did. I also have some inconsistencies with the pop-out menus, I often can´t access the XP11 toolbar (on top edge), but haven´t found out what is causing it. There are some other minor items, but I think we will be able to conquer those soon after starting the port. Jan whats strange is if your start the battery the menu works again. 1 Link to comment Share on other sites More sharing options...
FSSteven Posted December 3, 2016 Report Share Posted December 3, 2016 (edited) Temporary fix for the APU applied and I can get rid of the Gizmo menu. Next issue: X-Plane crashes after a while. No specific reason in the log. - However, it is the 2nd time X-Plane 11 crashes since I changed the altimeters settings Edited December 3, 2016 by FSSteven Link to comment Share on other sites More sharing options...
Tim013 Posted December 4, 2016 Report Share Posted December 4, 2016 On 11/28/2016 at 3:28 PM, Cameron said: Yes, it will be free. Wow. Thank you. It seems that some developers are taking advantage of XP11 being new to open another revenue stream with a paid product update. This is very kind of the IXEG team. Tim Link to comment Share on other sites More sharing options...
FSAviator Posted December 4, 2016 Report Share Posted December 4, 2016 On 30.11.2016 at 0:00 PM, FSAviator said: Not working for me because the window is located too close to the upper screen edge The Solution is: Go to the Graphics Settings: Set the Interface size from 150% to 100% which makes the upper screen edge menu's height smaller. Now you can hit the close-X of the Window... Link to comment Share on other sites More sharing options...
Recommended Posts