Jump to content

Plugins and Utilities

80 files

  1. XMidiCtrl - A MIDI Controller Plugin for X-Plane

    About this plugin
    You have a MIDI Controller at home with lots of buttons and knobs? Why not use it with your favourite aircraft to control the autopilot and many other functions! XMidiCtrl is a plugin for X-Plane 11, which allows you to connect MIDI controllers to X-Plane commands and datarefs without the need of additional software.
    The plugin was developed for X-Plane 11.50+ / 12 and supports Microsoft Windows, Linux and macOS (universal build).
    The following devices are officially supported:
    Behringer X Touch Mini The following devices are known to work:
    Behringer BCR2000 Behringer X-Touch Compact Loupedeck Live XMidiCtrl is open source: GitHub page
     
    Features
    Create different profiles for your aircrafts Bind knobs and buttons of your controller to X-Plane Commands and DataRefs Simulate push and pull functions for buttons (normal button press = push, long botton press = pull) Send MIDI messages to the MIDI device to illuminate buttons when certain modes are active (e.g. autopilot, heading mode, ...) Developed in C++ with no performance impact in your simulator  
    Donate
    If you like XMidiCtrl and want to support its further development then you can donate.
     
    Documentation
    Detailed documentation of the plugin and all mapping options can be found here.
     
    Support
    If you need support or want to chat about the plugin then please visit the official support forum.
     
    Installation
    Extract the ZIP file and move its entire XMidiCtrl folder into your ..\X-Plane\Resources\plugins directory.
     
    Examples
    I have included the following examples as well as overlays to print out in the examples folder:
    ToLiss A321 Hot Start TBM 900 Hot Start Challenger 650 IXEG 737-300 ZIBO 737-800 iniBuilds A310 Felis Boeing 747-200  
    Templates
    I included a template for the Behringer X-Touch Mini in the templates folder of the installation package. This template includes an example mapping and further information about the supported mapping options. I have also included my hardware configuration of the Behringer X-Touch Mini in the same folder. You can apply those settings using the X-Touch Editor from Behringer.
    To use the template file, simply copy it into your aircraft folder and start adding commands and/or datarefs for your buttons and encoders.
     
    Usage
    When a new aircraft is loaded, the plugin will search in the aircraft directory for a file called XMidiCtrl.toml. The profile uses the TOML language and holds information about the MIDI devices to be used and the mappings of the encoders and buttons. Further information about the TOML syntax can be found here. The configuration of XMidiCtrl might be a bit intimidating at the beginning, but it is quite straight forward. Please don't hesitate to contact me if you run into problems.
     
    Screenshots











    99 downloads

    Updated

  2. Aircraft Trip log

    Excel document replica of an aircraft technical log for logging flight and cycle data.

    196 downloads

    Updated

  3. XTouchDownRecorder (Win/Mac/Lin)

    XTouchDownRecorder
    X-Plane 10/11 aircraft landing touch down flight recorder
    it is used for aircraft landing data analysis
    it supports Windows, Mac, Linux x64 only
    feature
    landing fpm, pitch, G force touch ground times max fpm,pitch, G force around landing landing log will be automatically written to log file TouchDownRecorderLog.txt automatically pop up after landing button/key assignment XTouchDownRecorder Community XTouchDownRecorder Community
    click here open a new world


    Installation
    Unzip and move folder XTouchDownRecorder to X-Plane 11\Resources\plugins\ Start X-Plane Check X-Plane Plugin menu, there will be a XTouchDownRecorder Joystick button/key assignment
    assign button/key to cpuwolf/XTouchDownRecorder/Toggle TouchDownRecorder Chart
    X-Plane 11 user

    X-Plane 10 user

    Screenshot
    X-Plane 11

    X-Plane 10

    Data Analysis

     
    Contact Me 
    https://www.paypal.me/cpuwolf
    https://www.patreon.com/cpuwolf
    https://x-plane.vip/xtdr/
    QQ群:378072629

    49 downloads

    Updated

  4. Xsaitekpanels Configuration for HotStart TBM900

    *** XSaitekPanels map for HotStart TBM900 for:
    - Multipanel
    - Radiopanel
    - Switchpanel
    *** Requirements:
    - XSaitekPanels - v2.75+
    https://forums.x-plane.org/index.php?/files/file/14646-xsaitekpanels-linwinmac3264/
    - FlyWithLUA for XP11
    https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/
    *** Installation:
    Remove any existing TBM900 XSaitekPanels mappings.
    Copy "xsaitekpanels.ini" into TBM900 root folder. (ex. "[X-Plane]\Aircraft\X-Aviation\TBM-900\")
    Copy "acexsp_TBM900.lua" into FlyWithLUA Scripts folder. (ex. "[X-Plane]\Resources\plugins\FlyWithLua\Scripts\")
    *** Tested with TBM900 v1.08
    *** Mapping:
    Multipanel:
        - ALT    - Altitude dial
        - VS    - Vertical speed
        - IAS    - Speed dial
        - HDG    - Heading dial
        - CRS    - Captain's course dial
        - AT    - Nothing
        - TRIM    - MCP wheel
        - FLAPS    - Flaps
    Autopilot:
        - AP    - AP (YD)
        - HDG    - HDG
        - NAV    - NAV
        - IAS    - FLC (SPD)
        - ALT    - ALT
        - VS    - VS
        - APR    - APR
        - REV    - VNAV
    Radiopanel:
        - All standard default mapping.
    Switchpanel:
        - STARTER    - AUX BP
        - BAT        - Battery
        - ALT        - Generator
        - AVIONICS    - AP Trims
        - FUEL        - Fuel Sel
        - DE-ICE        - Airframe de-ice
        - PITOT        - Pitot & Static
        - COWL        - Inertial separator
        - PANEL        - Dimmer
        - BEACON    - Pulse
        - NAV        - Nav
        - STROBE    - Strobe
        - TAXI        - Taxi
        - LANDING    - Landing
    *** Known issues & limitations:
    - None. All should work fine.

    98 downloads

    Updated

  5. XMidiCtrl - Aircraft Profile for the Mitsubishi MU-2

    Aircraft Profile for the XMidiCtrl plugin
    Aircraft:
    Mitsubishi MU-2
    MIDI-Device:
    Behringer X-Touch Mini

    14 downloads

    Submitted

  6. XMidiCtrl - Aircraft Profile for SIAI-Marchetti SF-260

    Aircraft Profile for the XMidiCtrl plugin
    Aircraft:
    SIAI-Marchetti SF-260
    MIDI-Device:
    Behringer X-Touch Mini
     

    17 downloads

    Submitted

  7. X-RAAS: Runway Awareness and Advisory System

    X-RAAS is an open-source plugin that simulates the Honeywell Runway Awareness and Advisory System. Version 2.0 is a complete from the ground-up rewrite of the original X-RAAS FlyWithLua plugin. Please note that this is not just an upgrade of the old plugin and cannot be simply downloaded and plastered over the old 1.0 version. See below for details on how to install this plugin.
    INSTALLATION
    X-RAAS2 is a standalone plugin written in C and as such no longer requires FlyWithLua. To install the plugin, unzip the contents into: <X-Plane>/Resources/plugins. If you have been using X-RAAS 1.0, be sure to remove it from FlyWithLua/Scripts, otherwise you will get strange doubled annunciations.
    NEW FEATURES FROM VERSION 1.0
    X-Plane 10 & 11 compatible New configuration GUI: no need to mess around with config files anymore. The config files method is still supported, refer to section 2.1 of the included user manual for details on how to migrate existing customizations from version 1.0. Much improved performance: no more stuttering when Lua decides to collect garbage on slow systems. No more audio compatibility issues: this resolves audio compatibility issues with 3rd party addons such as Ground Handling Deluxe and the LES SAAB 340A (among others). More sensible automatic scenery alteration detection and scenery data cache rebuild. The cache rebuild is now also much faster. Much more fine-grained control over each RAAS monitor. Nicer text rendering and substitutable fonts & sizes. Ability to switch between "LONG LANDING" and "DEEP LANDING". User manual rewritten in LaTeX with clickable hyperlinks. Much more streamlined embedding into 3rd party aircraft avionics. The avionics integration guide is now a separate PDF manual with much more detail on how fine-tune the embedded software and how it compares to and interacts with a stand-alone installation. DEMONSTRATION VIDEO
    The video below is from version 1.0, but version 2.0 features virtually all identical annunciations.
    LICENSE
    X-RAAS2 is open-source software distributed under the terms of the Common Development and Distribution License ("CDDL"), version 1.0. The license text is included in the ZIP package under Documentation/COPYING.

    624 downloads

    Updated

  8. X-Plane 10 Compatibility Library for X-Plane 9

    X-Plane 10 Compatibility Library for X-Plane 9
    Dec 31, 2012 - Version 1.0
    By: "Chris K" and the ISDG Group
    Happy New year to All X-Plane 9 users.! Here is a gift for you..... From Us.
    ___________________________________________________________
    WHAT DOES THIS DO:
    This Library allows X-Plane 9 users to load X-Plane 10 Scenery files (with caveats, see below)
    ___________________________________________________________
    BACKGROUND:
    Here's something I thought about a few weeks ago; in terms of providing SOME kind of compatibility between XP10 sceneries and XP9 sceneries. I am primarily developing for XP10, and don't want to have to do 'parallel development' in terms of providing backwards compatibility to XP9. (I wish to work on one project, not two).
    Instead of myself creating a "kludged" (Nerfed?) version of sceneries for XP9 (which I had done in the past to provide XP9 users something), instead I decided once-and-for-all to fix the problem at it's root.
    ___________________________________________________________
    HOW DOES THIS WORK:
    This "shim" library file inserts blank objects, facades, forests, etc. where they exist in the new XP10 Library system. This is similar in nature to how the OpensceneryX "placeholder" library works, but this time we apply it to every single XP10 library object we could find.
    This tricks XP9 into loading most XP10 scenery; as the library paths now resolve. The list is accurate as of XP10.20 beta 10.
    I have tested this on my own scenery packages, and it works.
    ___________________________________________________________
    CAVEATS / WHAT DOES NOT WORK:
    You will not see any XP10 objects (hangars, gates, lights, etc.)
    You will not see any XP10 facades (terminals are a big one)
    You will not see any XP10 forests
    You cannot use large (4096x4096) textures:
    If a scenery uses a draped polygon of greater than 2048 resolution on any side, XP9 will crash out. This is a known XP9 limitation; as it was only in XP10 that texture sizes were allowed to be increased.
    You cannot use XP10-style facades
    If a scenery uses an XP10 style 'custom' facade (FACADE 1000), XP9 will try to still load the facade, and proceed to crash out. I have tried the EDPORT_BACKUP trick, but it's a no go, since the file can actually be found (and still tries to use it, despite the version string).
    You cannot use XP10-style Airport Layouts. XP9 Will Ignore them.
    But! You *CAN* cheat!... and try to change the first few lines of the apt.dat file in a custom scenery to say "850" instead of "1000". I have tested this on YPAD for example, and it worked, despite there being custom ATC information encoded in it.
    ___________________________________________________________
    HOW TO EXTEND:
    Got an object I missed? or a new facade showed up from somewhere?
    Edit the library.txt file; find the "virtual" path that the scenery is using, and add the appropriate line to the library.txt file. Have a look at the text file - it's pretty self explanatory the 3 fields you need =)
    Also, let me know if you found something. I'll include it in the master DB I have here.
    ___________________________________________________________
    WARNING:
    This Library and associated files are provided "as is". No Warranty; No suitability of fitness for any purpose; May not even work.
    Insert standard "Boiler Plate" Here.
    ___________________________________________________________
    © 2012 Chris K and the ISDG Group

    247 downloads

    Submitted

  9. Window CDU for IXEG 737-300

    This script duplicates the Captains CDU in a Window.
    To activate the Window CDU, move your mouse to the far right on your monitor, and press the button.
    Al normal functions should be available, except the CDU keyboard.
    If you check "<Use Keyboard for CDU Input" on the Window CDU however, you can use your computer keyboard to enter data. The backspace key functions as a CLR key.
    PLEASE NOTE: if "<Use Keyboard for CDU Input" is checked, ALL keyboard input is directed to the CDU, and you can't give normal key commands to the simulator. So, you can't change views, lower the gear by pressing g, etc. The ESC key releases CDU keyboard capture as well as unchecking the option.

    Current limitations; Inverse colored data from the CDU is displayed normally, MSG, FAIL and OFST are not duplicated, but only shown on the normal CDU.
    In theory the Window CDU should work in VR. You can drag the Window CDU to another monitor.
    PLEASE LET ME KNOW, if there is anything going wrong.
    Plugin needed:
    FlywithLua NG: https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/
     
     

     
     

     


     

     

    54 downloads

    Updated

  10. Web FMC projector

    null

    29 downloads

    Updated

  11. vSpeed callouts for IXEG 733

    Hello Captains!
    I made a simple LUA-script for v-speed callouts.
    It includes callouts for 80 knots, V1, Vr, V2 (V2 is optional) and positiv rate / gear up.
    The script is tested on X-Plane 10.51 and X-Plane 11 on Windows 10.
    Feel free to leave a comment if you liked the script (or not)  
    Requirement:
    - You will need FlyWithLua installed - http://forums.x-plane.org/index.php?/files/file/17468-flywithlua-for-xp9-and-xp10/
    Installation:
    - Unzip the files in [X-Plane]\Resources\plugins\FlyWithLua\Scripts
    You should get a structure something like this.

    Settings:
    Edit the IXEG_vSpeed.lua for the settings. 
    Set to true to enable "V2" callout and false to disable. true and false have to be written with lowercase letters.
    Enable_V2 = false
    Set to true to enable "Positive rate/Gear up" callout and false to disable. true and false have to be written with lowercase letters.
    EnablePosGearUp = true
    Sync the First Officers speedbugs with what you set on Captain side. Default = false. true and false have to be written with lowercase letters.
    SyncSpeedBugs = false
    Change "SoundLevel" to adjust volume for the callouts. Adjust between 0.10 min - 1.00 max (default 0.55)
    SoundLevel = 0.55
     
    How to use:
    This is how I use the bugs. It may not be correct compared to real procedures.
    The required bugs you need to set for the call out to work is Bug_2 to V1 speed, Bug_3 to Vr speed, and set the MCP speed to V2 (if you use V2 callout).
    You can set the other bugs to whatever you prefere.
     

    Demo:
     
    Known bugs/limitations:
    - Speed bugs can only be set on Captains side.
     
    Credits:
    @xplana for his excellent voice for the callouts
    For support, please visit:
    http://forums.x-pilot.com/forums/topic/12002-lua-script-vspeed-callouts/
     

    1,225 downloads

    Updated

  12. vSpeed callouts for HotStart Challenger 650

    Hello Captains!
    A LUA-script for v-speed callouts for the HotStart Challenger 650 v1.2 or higher.
    It includes callouts for 80 knots, V1, Vr, V2 (V2 is optional) and positiv rate / gear up.
    Feel free to leave a comment if you liked the script (or not)
    Requirement:
    The script requires FlyWithLua: Download the correct version for your simulator.

    FlyWithLua for X-Plane 11:
    - https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/
    FlyWithLua for X-Plane 12:
    - https://forums.x-plane.org/index.php?/files/file/82888-flywithlua-ng-next-generation-plus-edition-for-x-plane-12-win-lin-mac/
    Installation:
    - Unzip the files in [X-Plane]\Resources\plugins\FlyWithLua\Scripts
    You should get a structure something like this.

     
    Settings:
    Edit the Wizball_CL650_vSpeed.lua for the settings. 
    -- Set to true to enable "V2" callout and false to disable. true and false have to be written with lowercase letters.
    local Enable_V2 = false
    -- Set to true to enable "Positive rate/Gear up" callout and false to disable. true and false have to be written with lowercase letters.
    local EnablePosGearUp = true
    -- Set to 1 for callout by totoritko(HotStart). Set 2 for callout by xplana.
    local CalloutVoice = 1
    -- Change "SoundLevel" to adjust volume for the callouts. Adjust between 0.10 min - 1.00 max.
    -- Recommended value for CalloutVoice 1 - 0.70 - For CalloutVoice 2 - 0.30
    local SoundLevel = 0.70
    How to use:
    Just make sure you set the vSpeeds in the FMS and you will get the callouts.
    Demo:
    Known bugs/limitations:
    - Non at the moment.
     
    Credits:
    totoritko and xplana for the callouts
     

    704 downloads

    Updated

  13. Thai Airways: JAR-Design Announcement sound pack

    Thai Airways: cabin announcement.
    V1.0.0:  Safety demonstration video
    Note:
    These files are made for the Airbus of JAR Design.
    i can not confirm if the sound package also can be used for other aircraft.
    To open .7z file: go to 7-zip.org and download the lasttest version
     
    - Please share ur experience,I would love to improve! - 
     

     

    25 downloads

    Updated

  14. Thai Airways: FlightFactor A350 Announcement Sound Pack

    Thai Airways: cabin announcements.
    This sound pack has safety demonstration audio with & without an audio filter.

    Note:
    These files are made for the Airbus A350 of FlightFactor.
    i can not confirm if the sound package also can be used for other aircraft.
     
    In case that one of the download links are a death end, try these alternative links:
     


     
     
     
     
     
     
     
     
     
     
     
     
     
     
    - Please share ur experience,I would love to improve! - 
     

    8 downloads

    Updated

  15. TCAS CleanUp for the IXEG 733

    TCAS CleanUp for the IXEG 733.
    This script is ment for version 1.2.
    IF you have problems with TCAS targets not disappearing while using IVAO, VATSIM or PILOTEDGE, then this script may help you.
    If you dont have any issues, dont use this script.
    This script will only run when you are connected to IVAO, VATSIM or PILOTEDGE.
    Requirement:
    - You will need FlyWithLua installed - 
    XP10: http://forums.x-plane.org/index.php?/files/file/17468-flywithlua-for-xp9-and-xp10/
    XP11: http://forums.x-plane.org/index.php?/files/file/35579-flywithlua-for-x-plane-11-and-10-windows-linux-mac-os-x-version/
    Installation:
    - copy IXEG_TCAS_CleanUp.lua to [X-Plane]\Resources\plugins\FlyWithLua\Scripts
     

    137 downloads

    Updated

  16. TBM900 Start-UP procedure PDF file ENG FR

    Just two PDF file to add to your AVITAB for the START-UP procedure of the the TBM900 . This have been translate from the "START-UP PROCEDURE TUTORIAL" available with plane in a tutorial section.
    To be use has a quick reminder.
    All the tutorial follow word by word the vocal tutorial.
    Enjoy !!
     

    155 downloads

    Updated

  17. TBM-900 Xchecklist configuration

    This is my Xchecklist configuration file for the Hot Start TBM-900. It follows the quick start guide pretty closely with a couple of additions, such as a reminder to start and stop ACARS software.

    99 downloads

    Submitted

  18. Start flying.py

    Start flying.py is a simple program launcher that is somewhat more powerful than creating a batch file.
    If you launch other addons to run with your flight simulator this utility is for you. Set it up once and then you'll launch your Flight Simulator and addons with a single click.

    12 downloads

    Submitted

  19. Speedy copilot series

    Description
    Speedy Copilot makes for you the steps normally done by the first officer and pilot monitoring, when you are pilot flying and captain.
    This plugin is intended for :
    - the IXEG 737 Classic (version 1.21)
    - The FJS 737-200
    - The Rotate MD-88
    - The Toliss Airbusses
    -  The FF A320U
    - The FF 757
    - The FF 767
    - The freeware Let-410
    - The Zibo B737-800
     









    247 downloads

    Updated

  20. Speedy Copilot for IXEG 737 Classic

    Description
    Speedy Copilot for IXEG 737 makes for you the steps normally done by the first officer and pilot monitoring, when you are pilot flying and captain of a Boeing 737.
    This plugin is intended for the IXEG 737 (version 1.21). It was tested and works with X-plane 11.26. Please install at least FLW 2.7.11 NG.
    The Flight Crew Operating Manual makes a clear separation between actions from left and right seats. So we'd like to have the right hand actions (first officer and pilot monitoring) done for us in reaction to the phase of flight and to left seat actions (captain and pilot flying).
    Remember that the Copilot is not calling the checklist. The copilot is doing the procedure. We suggest that you run on your own the checklist at the end of each procedure.

    Additional features
    You can listen to the cabin PA and boarding music if PA receiver is activated on the left hand side Radio Management Panel. Cabin crew is handled by Speedy Copilot without pilot intervention according to phase of flight. In addition, the first officer pressure altimeter setting is linked to the captain's one. If you change the barometric settings, the F/O will synchronize his one. Context
    Several virtual copilot options might have existed previously but they seamed challenging to install and maintain, or required payware software. The intent in this Speedy Copilot for IXEG 737 project was to provide a very simple solution yet realistic and efficient. We made a transcript from the FCOM into a Lua script for the IXEG 737. The first version of Speedy Copilot for IXEG 737 was released in June 2018. In August 2018, we published Speedy Copilot 320 for FF/STS A320 Ultimate. Based on the success of  Speedy Copilot 320, many users reports and five months of updates and evolution, we transferred-back some exciting features to Speedy Copilot for IXEG 737, which led to version 4.
    Installation
    See PDF manual.
    Forum
    You can discuss this file in the IXEG forum if you wish : http://forums.x-pilot.com/forums/topic/14433-speedy-copilot/
    Screenshots

     







    Speedy Copilot series
    Speedy Copilot for IXEG 737 Classic
    Speedy Copilot 320
    Speedy Copilot Twinjet

    774 downloads

    Updated

  21. SmartFlying, an extension to make formation flight using ​SmartCopilot​.

    SmartFlying
    an extension to make formation flight using SmartCopilot.

    SmartFlying is a Lua script for FlyWithLua that allows formation flight on X-Plane over the internet, without the need of a dedicated server (like IVAO, VATSIM, ect.).
    It uses SmartCopilot to establish a connection between two remote users and share the data while it handles X-Plane's AI-Aircraft to show the position of the remotely connected aircraft.

    Currenty it has been tested on Linux (primary development platform) and Windows, but it should work without problem on MacOsX.
    SmartFlying uses AMS, an advanced package library for Lua included in the distribution archive, and it has been developed around FlyWithLua because unfortunately Gizmo is not currently available for Linux.
     
    Current version: 0.84a (21 Jan 2021)

    DOWNLOAD the lastest version of SmartFlying here: SmartFlying-LatestRelease.zip

    DOWNLOAD SmartCopilot from the home page: https://sky4crew.com/smartcopilot/

    DOWNLOAD FlyWithLuaNG here: FlyWithLua NG Download page

    Please read "SmartFlying-Readme.pdf" for installation instructions.
     
     
    GET INVOLVED
    Do you have experience in programming languages and a basic knowledge of Lua?
    Do you want to get involved in the development of SmartFlying, AMS and tools for X-Plane?
    Please contact me (CaptainSpaulding) here on X-Pilot.com Forum 
     

     

     

     

     


    LICENSE
    SmartFlying, an extension to make formation flight using SmartCopilot.
    AMS, an Advanced Library Package for FlyWithLua.
    Copyright (C) 2020 Pasquale Croce.

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY ; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program. If not, see https://www.gnu.org/licenses/ .

    16 downloads

    Updated

  22. Simple Season

    How to install:
    Select the version of snow you want: normal snow, deep snow or very deep snow. You only need one of it. For Alaska I prefer the version with very deep snow.
    Replace the old Simple Season with the new one and delete the file "SP_version" in the root of the folder "zzzzzz1000 world terrain" or delete the folder "zzzzzz1000 world terrain" in your custom scenery folder.
    This short python script will give you the 4 seasons!
    The script puts a copy of the default scenery in the custom scenery folder and adds 4 sets of textures: winter, summer, spring and fall. If you are starting X-Plane 10 or moving the aircraft (location -> select global airport) it will calculate the needed season and activate it
    No restart of X-Plane is needed.
    January - March: winter in the north...summer in the south
    April - June: spring in the north ...fall in the south
    July - September: summer in the north...winter in the south
    October - December: fall in the north...spring in the south
    If the temperature at your airport is below -2° C it will set winter too
    If it is winter and the temperature higher than +2° it will switch to autumn.
    My script do not include any texture files, this must be done by the community.
    That means you will not see any difference between summer, spring and fall until you have added textures for it.
    It uses the default texture files to create a very simple winterworld for X-Plane. It is not really a nice winterworld but better than nothing.
    I only added the simple winter to show that my script is working, do not expect too much.
    X-Plane 9 users can install the well known WinterWorld into my script.
    It is easy to add texture files to it.
    If you add your own texture files to my system then you must do it to the folder "SP_texture_template" with the subfolders summer, winter, spring and fall. The folder "SP_texture_templatefall" will be the root of the scenery folder after the season fall is activated. If you put your files to the normal texture folders it can happen that you overwrite the default X-Plane texture files. If this happen then you must run the X-Plane installer to repair X-Plane!
    Scenery designer can use my script to switch their scenery too
    Harddisk space:
    ---------------------
    This script do not touch any real file, it is no more than a gigant softlink manager. That means you do not need free harddisk space untill you are adding texture files.
    X-Plane Versions:
    ----------------------
    This script will work with all versions of X-Plane 9 and 10 till 10.99, X-Plane cant break it (at least i hope it) If my script detects a new version it will rebuild the system and every thing should work fine
    How to install:
    ------------------------------
    It requires Sandy Barbours Python interface
    http://www.xpluginsd...n_interface.htm
    Drop it in the folder PythonScripts and start X-Plane
    For the first start my script will need a very long time to copy the default scenery, my system needs around 17 minutes for it and my computer isn't slow
    After the installation you must restart X-Plane to register the new scenery.
    Known limitations:
    --------------------------
    You can change all files inside the default scenery except the library.txt. This file is always the default version.
    If you change it then X-Plane will crash!
    If my script is switching the scenery than X-Plane needs a few seconds to do this.
    During this time X-Plane is not responding. This is a limitation by X-Plane, there is no way to change it.

    277 downloads

    Updated

  23. Simple Ground Equipment & Services - (low tech ground services & pushback)

    Simple Ground Equipment & Services displays or hides static objects around your aircraft on the ground.
    Tested in X-Plane 12.04 and in X-Plane 11.55
    A variety of ramp equipment (passengers bus, GPU, Air start unit, cones, belt loader, ULD loaders, airstairs, PRM truck, deicing, catering, cleaning van...) Some moving vehicles: the follow-me car, emergency services (EMS), the fuel truck, the bagage carts and the passengers bus Active chocks that actually retain your aircraft and prevent it to move in a slope Animated and moving passengers (thanks to the MrX assets). New in June 2022. A simplified marshaller to better aim at your parking stand A simple pushback system, compatible with the X-Plane 12 aircraft carrier. Automatic pushback to designated position (X-Plane 12 only). New in November 2022 Aircraft arresting systems  (an arrestor cable, a net barrier or absorbing materials) Active deicing  that actually protects the airframe from X-Plane 11 and X-Plane 12 ice for a period of time  (available only in low temperatures) Adaptative ground kit  with slight variants for freighter, passengers aircraft, regional airplanes, business jets or general aviation, not always the same vehicles are coming. Armed forces variant of the set, with green painted vehicles. Any aircraft is serviceable.  Moreover a customization of the ground handling is already embedded for a lot of freeware and payware aircraft models. Trigger a distant car accident site, shipwreck, or a burning fire and for instance fly the emergency response in your helicopter. Place the aircraft carrier and the frigate on pinpoint coordinates Renovated in March 2023 You may change our provided set of vehicles (based on MisterX and XPJavelin's creations) by any custom ground vehicle you already have in your X-Plane directories. You may also use the X-Plane default ground fleet instead. Integration with XPJavelin's Speedy Copilot series which displays the vehicles according to the phase of flight (Speedy Copilot plugin required). And :
    Easy installation , drag the files in the FlyWithLua scripts folder, open the keyboard menu in X-Plane and attribute a key to toggle our menu. Generate the airport cache (in Plugin → FlyWithLua menu). You can further customize stuff in some configuration files but you don't have to. Not intrusive : keep full control  over the vehicles display, everything is commanded from our popup window. Plus we don't interact with your weight & balance. Freedom : you can use all our ground services if you wish or only install the script for one among them. A complete and detailed manual  More information is expanded in several PDF manuals inside the download. Multi-platform, since we use FlyWithLua, it works on GNU/Linux. For X-Plane 11 and X-Plane 12. The same script works in both simulators. All default airplanes and ground vehicles within X-Plane 12 are supported. New in September 2022.

    149 downloads

    Updated

  24. Saab 340A Flight Manual

    This document will help you fly this beautiful aircraft by the numbers.
    Enjoy!
    Regards
    Albert

    366 downloads

    Submitted

  25. Route to IXEG FMC

    This is a quick and dirty Windows Console application i made in order to create Company Routes for the IXEG B737-300. To get company routes which you can open by the FMC you could also use a simple text editor, however it was a tedious process so i decided to do this converter.
    All you have to do is to copy the route you are going to fly to the clipboard, only its waypoints and airways like this for example "XENAK UM985 LEDRI UL140 ALAMU DCT TEGRI UL605 NEKUL",
    then run the "route to ixeg fmc.exe" which will now ask you for the ORIGIN and Destination Airport (4-Letter ICAO Format in CAPITALS for each),
    once you entered those its done and there should be a coroute file ready to be opened by the FMC of the IXEG B737-300
    If your ORIGIN is, as in this example, LROP and your Destination is LTBA just enter LROPLTBA into the "CO ROUTE" line of the FMC and the route will be loaded.
     
     
    But first of all for setting it up you must check and enter the location of your IXEG Coroute file folder in the Settings.ini of the application.
    Mine is "D:/Program Files (x86)/Steam/SteamApps/common/X-Plane 10/Aircraft/X-Aviation/IXEG 737 Classic/coroutes/" so i entered it as a default.
    Also be carefull when you copy your route to the clipboard not to include any Airport, Runway, Flight Level, Sid, Star, Transition or anything else other than Waypoints and Airways (DCT and DIRECT is acceptable),
    it also has to be in CAPITAL letters same as the ORIGIN and Destination.

    259 downloads

    Updated


×
×
  • Create New...