General Aviation
175 files
-
PT-VGR CPT_Iceman_PA34_Seneca_II MOD for XP12
By Mario Lopez
The Piper PA-34 Seneca is a twin-engined light aircraft, produced in the United States by Piper Aircraft. It has been in non-continuous production since 1971.[4][5][6] The Seneca is primarily used for personal and business flying.[1]
This Piper PA-34 200T CPT_Iceman_PA34_Seneca_II MOD for XP-12 can be gotten at:
Seneca II – JetStream FS
It is a great MOD!
Special thanks to Diogo Alencar for the permit to use his PT-VGR livery.
Refinishing of the classic twin-engine Seneca II in the colors of the PT-VGR (this one is originally a Seneca III, as we do not have this model for the Xplane, the II is the one that most resembles).
Classic painting by Piper, of this twin engine that was a sales success in Brazil.
9 downloads
0 comments
Submitted
-
0 comments
Updated
-
BN2T / Bute Air 1.0.0 (fictional)
By Christophe
Both clean and dirty versions are packaged in one file.
Pay attetnion you need the Turbine version for this livery.
Do not hesitate if you find glitches.
Enjoy!
18 downloads
Submitted
-
N279MA Livery for MU2, Version 2.0 by TOGA Simulations
By tkyler
This folder name is prefixed with an integer. It is not required, feel free to change the name; however, beginning with Version 2.2 of the MU2 (not out as of this posting), I (TOGA simulation) will be utilizing a system whereby you can name a livery folder with an integer prefix number, and in a text file, you will be able to associate a tail number with that folder prefix integer. In this way, the tail number in X-Plane an online networks will match the livery tail number.
-tkyler
108 downloads
0 comments
Updated
-
C-FHMA Livery for MU2, Version 2.0 by TOGA Simulations
By tkyler
This folder name is prefixed with an integer. It is not required, feel free to change the name; however, beginning with Version 2.2 of the MU2 (not out as of this posting), I (TOGA simulation) will be utilizing a system whereby you can name a livery folder with an integer prefix number, and in a text file, you will be able to associate a tail number with that folder prefix integer. In this way, the tail number in X-Plane an online networks will match the livery tail number.
-tkyler
93 downloads
0 comments
Submitted
-
N937BB Livery for MU2, Version 2.0 by TOGA Simulations.
By tkyler
This is a livery for the MU2, version 2.0 by TOGA Simulations. This livery folder name has a integer prefix, which is not required, feel free to rename the folder; however, beginning with the MU2 version 2.2 (not released as of this posting), I (TOGA Simulations) will be implementing a system whereby you can associate a livery with a tail number using these integer prefixed folder names and an associated text file. When 2.2 is released, the MU2 docs on liveries will be updated to reflect this system. In this way, you can assign tail numbers that match liveries that will be utilized in X-Plane for ATC and online flying.
117 downloads
Updated
-
N15TC Livery for MU2, Version 2.0 by TOGA Simulations.
By tkyler
This folder name is prefixed with an integer. It is not required, feel free to change the name; however, beginning with Version 2.2 of the MU2 (not out as of this posting), I (TOGA simulation) will be utilizing a system whereby you can name a livery folder with an integer prefix number, and in a text file, you will be able to associate a tail number with that folder prefix integer. In this way, the tail number in X-Plane an online networks will match the livery tail number.
-tkyler
81 downloads
0 comments
Updated
-
Brazillian SR22 Carbon G6 Livery Pack for the TorqueSim Sr22 G1000
Livery pack with the PS-CSI, PS-PLK and PR-LTS livreries.
8 downloads
0 comments
Submitted
-
Brazillian Livery Pack Cirrus Carbon G5 for the TorqueSim SR22 G1000
Liveries of the PR-MME and PP-NDF, two Cirrus Sr22 Carbon G5, liveries for the TorqueSim Sr22 G1000.
12 downloads
0 comments
Submitted
-
Brazilian Livery Pack Sr22 Grand for the TorqueSim Sr22 G1000
Liveries in this Sr22 Grand pack: PP-BLV, PP-STN, PR-GRW, PR-JEO, PR-SRI, PR-UBA.
5 downloads
0 comments
Submitted
-
Brazillian Livery Pack of the Cirrus GTSX Turbo PR-CCT, PR-MEC and PP-LCS for the TorqueSim Sr22 G1000
Brazillian Livery Pack of the Cirrus GTSX Turbo PR-CCT, PR-MEC and PP-LCS for the TorqueSim Sr22 G1000
6 downloads
0 comments
Submitted
-
Brazilian livery of the PR-CPH for the TorqueSim Sr22 G1000
Brazilian livery of the PR-CPH for the TorqueSim Sr22 G1000
8 downloads
0 comments
Submitted
-
Brazilian Livery of the "PR-FHA" for the TorqueSim Sr22 G1000
Brazilian Livery of the "PR-FHA" for the TorqueSim Sr22 G1000
6 downloads
0 comments
Submitted
-
HotStart TBM900 - Strawberries n' Cream custom livery
By jonhmama
Strawberries n' Cream Livery
for
HotStart TBM900
by JonhMama
EN:
A simple, kinda vintage, livery for the most excellent TBM900 by HotStart. I really like the colour combination, so decided to put it in the skies using the TBM as the platform.
A custom font for the registration is included, keeping the plane in the light-hearted 60's-70's style livery.
PT:
Um pintura, meio vintage, para o excelentíssimo TBM900 da HotStart. Eu gosto bastante da combinação das cores, então decido levá-la aos céus usando o TBM como plataforma.
Uma fonte personalizada para a matrícula vem inclusa, mantendo o avião com o estilo mais engraçadinho dos anos 60 e 70.
Font used for custom registration: Heavy Heap
19 downloads
Submitted
-
Piper PA-31 Navajo CSL
By flanisher
This is a 3D model of the Piper Navajo for use when flying in online networks like VATSIM. This will be visible for multiplayer traffic flying type code PA31.
Downloading and Installation Instructions:
Download and then extract the PA31 folder into your pilot client CSL folder (X-Plane 11/Resources/plugins/xPilot/Resources/CSL/Bluebell/ for default installs) to see this model. This model includes lights (Nav, Beacon, Landing, Taxi), retractable gear/flaps, and rotating prop.
Please do not resell this work.
1 download
0 comments
Updated
-
CSL (M20P/M20T) - Mooney Ovation/Acclaim
By flanisher
This is a 3D model of the Mooney Ovation or Acclaim for use when flying in online networks like VATSIM. This will be visible for multiplayer traffic flying type code M20P or M20T.
Downloading and Installation Instructions:
Download and then extract the M20P folder into your pilot client CSL folder (X-Plane 11/Resources/plugins/xPilot/Resources/CSL/Bluebell/ for default installs) to see this model. This model includes animated lights (Nav, Beacon, Landing, Taxi), retractable gear, rotating prop, and flaps. There are animated speedbrakes however there appears to be a dataref issue (these don't appear to animate in the sim). I hope with the XP12 Mooney release we can have that fixed!
Please do not resell this work.
21 downloads
0 comments
Updated
-
B350 - King Air 350 CSL
By flanisher
This is a 3D model of the King Air 350 for use when flying in online networks like VATSIM. This will be visible for multiplayer traffic flying type code B350.
Downloading and Installation Instructions:
Download and then extract the B350 folder into your pilot client CSL folder (X-Plane 11/Resources/plugins/xPilot/Resources/CSL/Bluebell/ for default installs) to see this model. This model includes lights (Nav, Beacon, Landing, Taxi), along with animated gear, flaps, and prop.
Please do not resell this work.
Thank you!
27 downloads
0 comments
Updated
-
Take Command! Torquesim SR20 Entegra Dark Interior & Outback Livery
By Attitude
Created for the Torquesim SR20 Entegra by request from @Boris on our Discord.
The Outback livery was previously only available for the SR22 versions but with some cleaning up I decided to make it available with this interior. You can download the livery which already includes the interior or the interior (objects.zip) all by itself to install in whatever Entegra SR20 livery you choose.
Livery- Drop the unzipped livery into the SR20 liveries folder. Enjoy.
Interior (objects.zip) - Drop the interior textures into whatever livery you wish. They should go in that livery's objects folder.
26 downloads
Updated
-
TorqueSim BN-2T Turbine Islander Props Pack
By TS_Ulrich
By request, here's the 4 bladed and MT props adapted for the BN-2T.
All necessary textures are included in the pack, as are the appropriate prop blurs for the MT propellers.
Installation:
1. Make a backup of props_2t.obj, props_2t_ALB.png, props_2t_NRM.png, and deice_boots_2t.obj.
2. Copy the files from either the 4-bladed or 5-bladed folders to the Turbine Islander's objects folder.
3. If you use the 5-bladed MT props, copy the files from to_main_folder. Don't forget to backup the BN-2T Islander G5_prop.png and BN-2T Islander_prop.png textures first!
Because all three possible variants use their own textures in the object folder you don't need to worry about overwriting anything there. Keep backups regardless, but the switching around here should be a lot easier.
101 downloads
Submitted
-
TorqueSim BN-2 Islander Props Pack
By TS_Ulrich
Okay, so this is what it says on the tin
It's 3- and 4-bladed props, built from my original Blender files for this aircraft. I know some people have been wanting these for a while.
They are literally modified meshes from the 2-bladed props, with transferred animations, changed deicers (to get the correct deice config on the blades), and use the same textures as the originals. They should be compatible with just about any livery, only caveat is that due to the UV mapping, fancy spinners (aka multi-hued) may not work.
The props themselves are still wearing the Hartzell colors. If you want different textures, I'll leave that up to y'all livery painters.
Enjoy!
- Ulrich / Random'93
Installation:
Make a backup of propellers.obj and deice_boots.obj (located in the 'objects' folder of the Islander). Copy the propellers.obj and deic_boots.obj from either the props_4b or the props_3b folder into the Islander's 'objects' folder, overwrite, load up, and go. To revert, just restore your backup.108 downloads
0 comments
Updated
-
BN2T / Canada SAR (fictional)
By Christophe
Do not hesitate if you find glitches !
Enjoy!
61 downloads
0 comments
Submitted
-
N940BN
By -Paul-
This is a repaint based on N940BN, a TBM 940. One video, recorded during a flight of the N940BN, can be found here;
There are limited pictures of this livery so I had to use some artistic licence.
The registration is painted to the airframe therefore this livery is not suitable for thoses who want to use your own livery
(I do plane to upload another version for users to add their own registration).
***To Install***
Copy the folder 'N940BN' to your X-Plane 11 folder \Aircraft\X-Aviation\TBM-900\liveries
Version 1.1
The black spinner is now within the aircrafts object folder. The folders 'Black SPinner' and Back Up Original Spinner' are no longer required.
Happy flying
Paul
111 downloads
Updated
-
0 comments
Updated
-
Torquesim Islander Panel Textures - Both variants
By Attitude
For The Torquesim BN-2B Islander 1.2.0+ & BN-2T Turbine Islander
11 different panel textures - Install by dropping into your livery of choice or replace the stock textures.
By livery:
Navigate to the livery folder of your choosing, drop panel texture of your liking into the objects folder of the livery.
Replace default:
Navigate to the Piston and/or Turbine Islander folder, drop the texture into the main objects folder.
Enjoy!
217 downloads
Updated
-
Default Baron B58 "Crimson-Black" Livery
This is a livery for the default Baron B58 (by Laminar Research) for X-Plane 11. It was painted from scratch using the free and open-source raster graphics GIMP. The fuselage and wing files were modified; the cockpit file stayed the same. 2 generated icons are also included with the livery. This is our first attempt in creating a livery, and we hope you enjoy it. If you have any questions, comments, or suggestions, don't hesitate to contact us. Happy flying!
To install, simply download the file and unzip to X-Plane 11 -> Aircraft -> Laminar Research -> Baron B58 -> Liveries
YouTube: https://www.youtube.com/c/TheMartinAllianceAviation
42 downloads
0 comments
Updated