DSF Scenery Packages
145 files
-
Johnston Atoll Playground
By AIRSEVEN1234
A minor modification of Johnston atoll, with added functions.
3 downloads
- custom
- johnston atoll
- (and 9 more)
0 comments
Updated
-
ID41 Stibnite
By daemotron
This is my rendition of Stibnite Airfield (ID41), Yellow Pine, Idaho, USA. It is purely library-based and doesn't contain any custom objects.
It features the curved runway, some vegetation and a simple cabin. I recommend using it with ortho scenery (the screenshots were made using VStates Idaho) - the default mesh has some glitches in the area.
Libraries required:
MisterX Library CDB Library 3D People Library20 downloads
Submitted
-
C56 - Bult Field Monee, IL
By Attitude
I present to you C56, Bult Field. A romantic lovely little gem of an airfield tucked just 30 miles South of the hustle and bustle of downtown Chicago, Illinois. Years ago I had the pleasure of working a dream job. I was an aerial pipeline observer for an oil and gas aviation outfit in Conroe, Texas. My job was to take photos of the pipeline "right of way" while doing 2.5G turns around a point. It was a rodeo of a job, running into hangars, a few near misses with towers and other aircraft and several VFR into IMC events.
I learned so much in this job (what to do and not to do) and it is partly what led me into aircraft development for X plane. This airfield was a savior many times. Once done running the very busy pipeline just under the Chicago Class B airspace at about 500' AGL this was our rest stop. Microwavable hamburgers, sausage egg and cheese sandwiches and burritos. With a nice spread of candies and soft drinks. The pilot diet.
This "terminal" (mansion) contains a full movie theater, full restaurant grade kitchen, amazing WWII museum and vacant offices where a rest can be had. The story goes the original owner, Billionaire Mr. Bult, built this mansion and field for himself and eventually for some reason or another sold it to the State of Illinois where it waits for the day to start serving regional customers.
---------------------------------------------------------------------------------------------
Installation goes the same as with any other scenery. Extract the folder then drag and drop it into the custom scenery folder.
Performance issues are possible. This was built over the last few years in my free time and I quickly wrapped things up over the last few nights and this has not been tested on any lower end machines. There are most likely a few initial bugs and If there is a frame rate issue I might be able to whip out a lite vegetation version. Let me know!
Required libraries: OpensceneryX & MisterX library
---------------------------------------------------------------------------------------------
RIP Mr. Ted Sanders. You were a fine gentlemen helping us with our issues every time we came in and had a great sense of humor. Thanks for proving me right about how to land a 182 properly.
62 downloads
Updated
-
LGKL Kalamata AB GEF
LGKL V2.0.0
Final changes
Welcome to the Airport LGKL Civil Aviation and Airbase in Kalamata located south of the Peloponnese (Greece region of Messina).
You will enjoy the flight between the mountain and the sea over the fields of olive trees.
Good flight !
Version compatible with X-Plane 11.50
I recommend using Ortho4XP.
+37+021
+36+021
+37+022
+36+022
Library required:
https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
- GT_Librairy
- SAM
- JB_Library
- PP_Library
- R2_Library
- OpenSceneryX
- CDB_library
- MisterX
- The_Handy_Objects_Library
- ruscenery
- ORBX_library
- x_prefab_library
- Last Version of "simHeaven"
https://simheaven.com/simdownloads/x-europe-4/
NAPS_Library
https://dl.dropboxusercontent.com/s/ndoxkzqlhz5clxz/NAPS_library_v7.2.zip?dl=0
57 downloads
0 comments
Submitted
-
LGZA Zakinthos GEF
Zante Dionýsios-Solomós International Airport (IATA code ZTH • ICAO code LGZA) is an airport serving the island of Zante, Greece, and located near the town of Kalamaki. It is named after the Greek poet Dionýsios Solomós, originally from the island.
Planes are not allowed to take off or land from midnight until 4 a.m., in order to preserve an endangered species of turtles (caretta caretta) which come to lay their eggs on the beach during the night. The airport opened in 1972
Version compatible with X-Plane 11.50
I recommend using Ortho4XP.
+ 37 + 020
The libraries required for this version are:
https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/
- GT_Librairy
- SAM
- JB_Library
- PP_Library
- R2_Library
- OpenSceneryX
- CDB_library
- MisterX
- The_Handy_Objects_Library
- ruscenery
- ORBX_library
- x_prefab_library
- Dernière version de "simHeaven"
https://simheaven.com/simdownloads/x-europe-4/
NAPS_Library
https://dl.dropboxusercontent.com/s/ndoxkzqlhz5clxz/NAPS_library_v7.2.zip?dl=0
44 downloads
0 comments
Submitted
-
SBFL - Florianópolis
New scenery for Florianópolis has a new terminal (1) and new parking. So far the reference images for scenery creation are not enough for better assertiveness and accuracy in locating objects and pavement, so getting new images will be updating.
I didn't put the SAM jetways due to some issues, but as soon as I fix them I'll be updating.
It is highly recommended to use Airport Environment HD for better arpon lighting and texture quality.
If you have problems downloading, you can download here: SBFL - Florianópolis 1.0 | SadayScenery
New charts here: NEW CHARTS SBFL
For more sceneries: SadayScenery
The library used in the XP10 scenery version is not mine, it's from XP11 to recognize the objects, facades, jetways, lines and ground signs.
34 downloads
- sbfl
- florianopolis
- (and 1 more)
0 comments
Submitted
-
SBAF - Afonsos
To install, simply extract the scenery folder into ... X-Plane 11 \ Custom Scenery folder.
For the correct operation, make sure the scenery is above “Global Airports” in your “scenery_packs.ini” file. The library used was based on version 11.33 of the X-Plane.
Enjoy
Campo dos Afonsos is a neighborhood of the middle zone of the middle class of the city of Rio de Janeiro, belonging to the region of Realengo, where the Afonsos Air Base is located (BAAF / SBAF), base of the Brazilian Air Force established in the Garrison of Aeronautics dos Afonsos. Campo dos Afonsos is also known as the birthplace of Brazilian aviation because its history is confused with the history of aviation in Brazil. It was from 1941, with the creation of the FAB, which was officially designated as Afonsos Air Base. Source: Wikipedia.
For more: https://sadayscenery.blogspot.com/
12 downloads
0 comments
Submitted
-
SBSP - Congonhas Airport
By axmiha
São Paulo/Congonhas Airport (IATA: CGH, ICAO: SBSP) Portuguese pronunciation: [kõˈɡõɲɐs] is one of the four commercial airports serving São Paulo, Brazil (Campo de Marte Airport, Viracopos International Airport, São Paulo–Guarulhos International Airport being the other two).
After unzipping the 3 files into the Custom Scenery folder, set the .INI file to look like this:
...
SCENERY_PACK Custom Scenery/CGH - OSM Versão 1.0/
SCENERY_PACK Custom Scenery/SBSP_1.0/
SCENERY_PACK Custom Scenery/BR - SBSP Mesh Fix v1.0 by SNowblind_7/
Tech OBS: Most of it was modeled and custom made, but there are some models I used from OpensceneryX, ff_extended_LOD and World Models. Some users reported a problem (my error), and the library.txt inside SBSP folder file needs to be updated. The new file is attached here (below) - library.txt Please copy/replace this library.txt into SBSP, so the scenery loads even if you don't have the libraries.
ATTENTION: Scenery Validated to version 10.50. Since I use X-Plane 10, I don't know about incompatibilities with X-Plane 11.
...
=============================================
The two picrures called "Rwy17R_ILS_adjust.jpg" and "Rwy35L_ILS_adjust.jpg" show how to set the correct ILS alignment for both runways. In XPlane, go to local map, select the ILS, click "edit" and copy the coordinates.
Thanks to Richard Nunes for the OSM file, and specially SNowblind7 for the mesh, without which this airport makes no sense,
____________________________________________
Libraries suggested (but not required):
World Models
OpensceneryX
ff_library_extended_LOD
library.txt
180 downloads
0 comments
Updated
-
KGFL | Floyd Bennett Memorial Airport
By UA90
In collaboration with renowned freeware FSX developer EdGeneer Cox, I proudly present KGFL for X-Plane 11.
Floyd Bennet Memorial Airport is located in the Southern Adirondack region in the city of Glens Falls NY. This airport has an annual ballon festival, and is a gateway for the many VIPs traveling to see the Travers States in Saratoga Springs, as well as the tourist area of Lake George and the Adirondack Mountains. The airport was once a hub for the now defunct airline Mohawk Airlines back in the day, and is now mainly served as a business airport for the region.
This rendition of KGFL is based off of Version 3 of one of the most popular and detailed freeware airport ever created for FSX created by EdGeneer Cox. Version 1.0.0 features:
- ZL17 Orthophotos from USGS. Ortho4XP is highly recommended.
- Custom ground pavement and markings by N180GS
- Custom hangars, FBO, and static aircraft by N180GS
- More objects from MisterX Library and OpenSceneryX.
To add on a personal note: After contributing plenty of FSX conversion advice in the forums over at the "ORG", as well as a bunch of other useless posts, it's about time I give back to the community and share this wonderful scenery created by EdGeneer Cox for FSX, and brought to you by me to X-Plane 11.
Please report ANY bugs that you have found in the scenery, and I will be glad to address them in a future update.
63 downloads
0 comments
Submitted
-
KHAF half moon bay
By SAILOR2
this is the half moon bay airport in California. this is near san francisco international airport in northern California. half moon bay is a very beautiful area that is well known for seafood and sailing, hope you enjoy landing right over fishing boats and sailboats!
I am really sorry this requires a lot of packages :
mister x library2(just the updated version)
pm library
ff library extended
RE library
NAPS library
fruit stand aircraft library
all can be found here:Master List of Libraries - Scenery Development Forum - X-Plane.Org ...
this includes detailed scenery of a small remote airport and half moon bay the town which i worked hard on. this is one of my first works for x-plane. sorry wrong picture it actually looks good i just cant upload any good pictures because it says the file size is too big.
28 downloads
0 comments
Submitted
-
SAZS San Carlos de Bariloche Airport
By axmiha
Version 1.0 is for XPLane 11. Version 1.0_10 is for XP10.
Bariloche airport, simple, small and very chic.
No external libraries needed.
Please visit - http://axplane.blogspot.com.br/
200 downloads
0 comments
Submitted
-
SBBE Val de Cans International Airport
By axmiha
The file SBBE_1.0 is actually for X-Plane 11 - there's no 11 to choose in this form. The file SBBE_1.0_10 is the XP10 version (the only difference is there is no Ground Services).
Belém/Val de Cans–Júlio Cezar Ribeiro International Airport (IATA: BEL, ICAO: SBBE) is the main airport serving Belém, Brazil. Val de Cans (sometimes spelled Val de Cães) is the name of the neighborhood where the airport is located. Since 13 April 2010 the airport is named also after Júlio Cezar Ribeiro de Souza (1837–1887) a researcher of balloons. It is operated by Infraero. Some of its facilities are shared with Belém Air Force Base of the Brazilian Air Force.
Libraries required - none, theoretically. I used only the default lib (fence.fac) and Marginal's autogate. The rest is custom made.
201 downloads
0 comments
Submitted
-
TNCS – Saba Juancho E. Yrausquin Airport
By uwespeed
This scenery will work with X-Plane 11 (and most probably with X-Plane10 – although not tested).
Place TNCS_Saba_uwespeed from the downloaded zip file into the Custom Scenery folder of your X-Plane installation.
You also should install (if not already done):
OpensceneryX (http://forums.x-plane.org/index.php?/files/file/2226-opensceneryx/)
RD library (http://rdesignx.weebly.com/freeware.html)
Flags of the World (http://forums.x-plane.org/index.php?/files/file/17090-flags-of-the-world-real-flag-ii/)
3D People Library (http://forums.x-plane.org/index.php?/files/file/26611-3d-people-library/)
Handy Objects (http://forums.x-plane.org/index.php?/files/file/24261-the-handy-objects-library/)
IMPORTANT: If you have already installed the scenery St Barth - Saba - St Eustache by XPFR (http://www.xpfr.org/?body=scene_accueil&sc=314), which I highly recommend, due to the included orthophotos and mesh, you must place my scenery above it.
As written above, there is already TNCS available by XPFR – so what‘s the reason to install my version? Well … that‘s easy ;-): my version contains the whole island, not only the airport and has some more nice animations at the airport (passengers entering and leaving the static Twin Otter and a girl walking around the parking lot with her dog).
For some more information read the included readme file.
250 downloads
0 comments
Submitted
-
SUMU - Carrasco International Airport
By axmiha
Carrasco International Airport, Montevideo, Uruguay.
With GroundTraffic animations and Marginal's Autogate.
Libraries suggested - not required.
CDB LIBRARY
FJS_Scenery_Library_v1.7
ff_library_extended_LOD
MisterX_Library
OpenSceneryX
R2_Library
ruscenery
Visit: http://axplane.blogspot.com.br/
657 downloads
Submitted
-
OPPS:Bacha Khan International Airport
By shipi
OPPS:Bacha Khan International Airport,Pakistan,Peschawar
The scenery is now complete.The scenery is not the best.The main thing is you can fly in OPPS now.
Libraries:MisterX Libary, Lib/airport, CDB-Libary, Re_Libary,BS2001_Objects, 3D_people_libary, handyobkects, Fruitstand_aircraft and Vehicle Libary.
Installation
Unzip the file and put it in the custom scenery.
Enjoy your flight in OPPS
40 downloads
0 comments
Updated
-
YSSY Sydney Kingsford Smith Intl (ISDG)
By chris k
YSSY Sydney Kingsford Smith Intl (XP10)
Sydney, Australia - v1.41
Aug 10, 2014
WARNING: Use at Your own Risk. We assume no responsibility for blown up power supplies or melting GPUs.
Requirements:
- X-Plane 10.20 (http://www.x-plane.com/)
- OpensceneryX 2.0 (http://opensceneryx.com/)
- Texture Compression ENABLED (else you'll blow X-Plane's 3.5Gb RAM Limit)
This scenery runs around 860 Mb loaded at "extreme" resolution compressed w/X-Plane 10 Loaded.
Uncompressed, and you're into 1.4-1.5 Gb, meaning you're dangerously close to crashing XP10_32bit
- A Modern Video Card with MINIMUM 512Mb VRAM.
This scenery fully runs at or around 512Mb of VRAM when loaded in XP10 with "very high".
I highly suggest this setting for now until XP10_x64
- You will want to run this scenery at "very high" or "extreme" Texture Resolution, or else the effect is lost.
Sorry to the users with 256Mb VRAM or less. This just isn't going to work out for you.
Time to think of upgrading, since XP10 uses almost 300Mb all by itself, with nothing loaded.
__________________________________________________________
SHUT DOWN EVERYTHING ELSE ON YOUR COMPUTER if you have a 512 Mb Video Card!
You will need every ounce of VRAM in your card for this scenery!
Kill any Web Browsers, Desktop Wall Paper, and anything that couple possibly use Video RAM.!
- If you get some texture swap, look around a little bit at the beginning in all directions, and let it settle.
- Go to External views as well, zoom far out and back in, X-Plane will start swapping out unused textures.
- Go to rendering options, toggle between full-screen to windowed and back. For some reason, this also works for me to optimise the VRAM.
__________________________________________________________
Credits:
Many people have generously donated their time, skills, and objects. This could not have been done without them.
- Ropeless (Many Many Many Many Photoshopped Tiles, Concrete Gables from YSCN - Thanks to the Doctor!)
- Fenriz (Many Many Photoshopped Tiles)
- SimmoW (Photoshopped Tiles)
- GaryBKK (Various Shipping Containers, Container Crane)
- Sethesus (Checkered Huts, Electrical Junction Boxes, YSSY Tower, Signage, Clutter)
- HenryT (Checkered Huts, Clutter)
- Nickster (Radio Mast, Radar Ball, Red shipping containers, dumpsters, diggers, bollards, Clutter)
- Skyflyer (HungryJacks, Billboards, McDonalds, Signage, Clutter)
- Laminar for the LOWI XP9 Buildings.
- Nerarmap.com for the Orthophotography Imagery at 15cm resolution (free redistribution and derivation for noncommercial use)
__________________________________________________________
Additional Files/Enhancements:
I highly suggest using Jack's (FlyJSim's) "über-kewl" Asphalt replacement textures found here for proper runway effect:
Hi-Res Replacement Asphalt Textures
I also suggest the Vehicle Library Extension found here, and crank up the 'Number of Cars". Looks great!
Vehicle Library Extension
__________________________________________________________
Bugs/Todo:
Still some stuff to do - I'm aware of them i.e:
- Some Gate Markings/Centrelines aren't finished yet.
- Certain Buildings are simply "stand ins" until we better XP10/OSX objects
i.e. "Delta Hangar" should be Qantas Hangar, and "USPS Post Office" should be Australia POST.
__________________________________________________________
License:
This scenery is Dorito-ware. Meaning that if you like it, you are obligated to send us a bag of Cool Ranch Doritos.
The Australians have never heard of this flavour, and it's impossible to purchase it here in Sydney.
__________________________________________________________
Author's Notes:
This Scenery took 5 Months of planning, editing, assembling, and a complete Team of like-minded dedicated people.
I was very fortunate to have met and worked with an awesome and talented group of individuals on this project.
My hats off to Ropeless, who was by far the most dedicated individual and "photoshopping-machine" on this project. =)
Without his tireless work and encouragement, this project would have never gotten off the ground.
This scenery is dedicated to the entire X-Plane Community. You know who you are =)
© 2012-2014 chris k
__________________________________________________________
P.S. You like Photoscenery?
Try this one: NZCH Christchurch Airport Photo Scenery (XP10)
Or this one: YSCN Camden Airport Photo Scenery (XP10)
2,128 downloads
Updated
-
YBWW - Brisbane West Wellcamp Airport and Business Park
Airport - FVH - XPA - YBWW - Brisbane West Wellcamp_Towered
New version of FVH-Airport Scenery for YBWW - Brisbane West Wellcamp Airport.
This version includes the Wellcamp Business Park which YBWW is the anchor. There has been extensive modifications including, detailed road network, new hangars, offices, shopping centres, restaurants, service station, billboard signs, water features, lighting and many more enhancements.
YBWW is now conducting weekly international cargo flights with Cathay Pacific Cargo, a first for a Australian regional airport and on the 23 October 2016 there was a international passenger flight from Wellcamp to shanghai, china, another first for a Australian regional airport.
The business park part of Wellcamp is still in it’s infancy and rapidly growing, many of the features in this release are pure imagination, and my impression of what may come to YBBW. There are plans for a “Wet Lands Area” and also rumours of a V8 Supercar Race Track, which will no doubt be welcomed by V8 Supercar enthusiasts.
Many thanks to Frank Van Hal (FVH-Airport sceneries) for his help and encouragement in many areas during this build.
Enjoy this updated scenery.
Capt Kev.
X-Plane Addicted.
The following libraries are required, make sure to update to the latest version of libraries.
List of required libraries
3D_people_library
CBD-Library
THE-FIAB_Aircraft Library
FJS_Scenery_Library
gt_library
The Handy objects Library
flags of the world
ff library
MisterX_Library
NAPS_library
world-models
OpenSceneryX
ruscenery
What's New in Version 2.0.1
Released Yesterday at 06:26 PM
Updated YBWW scenery. Fixed the issues with the runway and buildings sticking up in the air in X-Plane 11.
This update is now compatible for X-Plane 11.
Download this new package and replace the existing scenery.
38 downloads
0 comments
Submitted
-
KIAD - Washington Dulles International Airport
By chris_flies
INTRODUCTION:
Welcome to the busiest airport in the mid-atlantic, outside the New York area! Because this is my local, major airport, I found the need for a detailed scenery package for this airport. I believe I have pulled that off! The iconic main terminal and classic control tower, designed by Eero Saarinen, are well-represented in this package, I custom-made the models using SketchUp Make and a lot of patience. Another Dulles Airport Landmark is the National Air and Space Museum at the Udvar-Hazy Center, again, this building was custom built using SketchUp Make, and even more patience. I used Overlay Editor heavily in the creation of this package, along with World Editor (To work on the detailed parts; ATC, Ramp Starts, etc.). I made a real effort to keep this package conservative in its detail, to save frame rate, and it seems to have really improved the overall experience–for me, at least–over version 2. I hope you enjoy all of the many hours of agony and hard work I went through to provide this beautiful creation!
VIDEOS:
Dulles IAD v3.0 Overview
Dulles IAD v3.0 Trailer
REQUIREMENTS:
OpenSceneryX FF_Library FAIB_Aircraft MisterX_Library AutoGate Plugin by Marginal (Optional) INSTALLATION:
Always check the Readme.rtf file before installing.
Simply Copy and Paste (After Unzipping) "Dulles IAD vX.X" into your X-Plane 10/Custom Scenery folder.
Be sure all of the required libraries are installed, or else you'll get an error message saying "The scenery may not look correct!"
108 downloads
- dulles
- washington
- (and 5 more)
0 comments
Updated
-
LGSR Santorini
By uwespeed
Currently my time is a little bit limited, thus I decided to release a version 0.9 of "Santorini X-Plane".
Installation
Place GR_LGSR_Santorini_0.9 and zz_GR_+36+025_GR_Thira_gx17 from the downloaded zip file into the Custom Scenery folder of your X-Plane installation. For updating to V0.92, see further below.
You also should install (if not already done):
1. OpensceneryX library (http://www.opensceneryx.com) – latest version.
2. FF library (http://forums.x-plane.org/index.php?app=downloads&showfile=12836)
3. Flags of the world library (http://forums.x-plane.org/index.php?app=downloads&showfile=17090)
4. Ruscenery (http://ruscenery.x-air.ru/files/RuScenery.zip)
5. People library (http://www.x-plane.at/drupal/node/191)
6. R2Library (http://xplane.cz/en/r2-library/)
For the time being you should turn „runways follow terrain contours“ off, until I have edited the mesh (and added more features) in the next release.
Remark - you will see the cruise ships only from around noon on, but not in the morning (like in reality).
For further information please read the included pdf.
New in 0.91
Resolved issue with cars
Runway lights for 34L and 16R
Runways fit better to orthophotos
New in 0.92
Sharper looking othophotos with the "decals" technology (see this posting), and this screenshot.
Download ONLY the terrain.zip file. Unzip it into in the "terrain" subfolder of zz_GR_+36+025_GR_Thira_gx17 and overwrite all existing files.
Have fun ...
632 downloads
0 comments
Updated
-
LELN - Leon (Virgen del Camino) - Spain
By hades_esp
Please, rate and/or comment it. Thanks so much.
Por favor, evalúe y/o coméntelo. Muchas gracias. ***************************************************************************************************
[ENGLISH]
The scenery needs checked "Runways follow terrain contours" option and HDR activated for a correct ilumination.
This scenery don't need any aditional library but...
Some objects used in this scenery are from:
- Flags of the world (link broken).
- 3D people library (link broken).
- OpenSceneryX ( http://www.opensceneryx.com/ ).
- Autogate ( http://marginal.org.uk/x-planescenery/plugins.html ).
- C101 from freeware LESA - Matacan - Salamanca Airport by JRollon.
Thanks to my family and to Mr. Antón García and Mr. Jorge Álvarez for his
selfless collaboration in this project. Thank you very much to all PUE, in
general, for their tests and support.
(c) Luis Mtnez. 2016 - Freeware. Forbiden their sale or rent.
(c) Plus Ultra Virtual Airlines Virtual ( http://www.plusultrava.es/ ).
(c) Pilotos Virtuales España ( http://www.pilotosvirtuales.es/ ).
If changes are made on scenery, please, report.
***************************************************************************************************
[ESPAÑOL]
El escenario necesita la opción "Pistas siguen contornos del terreno" y HDR activado para una correcta iluminación.
Éste escenario no necesita ninguna librería adicional, pero...
Algunos objetos usados en él, son de:
- Flags of the world (enlace roto).
- 3D people library (enlace roto).
- OpenSceneryX ( http://www.opensceneryx.com/ ).
- Autogate ( http://marginal.org.uk/x-planescenery/plugins.html ).
- C101 del aeropuerto gratuito LESA - Matacan - Salamanca de JRollon.
Agradecimientos a mi familia así como a D. Antón Egea y D. Jorge Álvarez
por su colaboración desinteresada en este proyecto. Muchas gracias a todos
los PUE, en general, por sus tests y apoyo.
(c) Luis Mtnez. 2016 - Freeware. Prohibida su venta o alquiler.
(c) Plus Ultra Virtual Airlines Virtual ( http://www.plusultrava.es/ ).
(c) Pilotos Virtuales España ( http://www.pilotosvirtuales.es/ ).
Si se hacen modificaciones en el escenario, por favor, comuníquelo.
191 downloads
Updated
-
KHOU William P Hobby Airport & Downtown Houston
By 3rdwatch
KHOU Houston Hobby Airport for X-Plane 10
By
Tom W. and Chris G.
aka
(tsw66 and 3rdwatch)
Features:
Detailed rendition of William P. Hobby Airport KHOU Accurate airport layout Custom 3d models for all terminals and prominent buildings. Moving Jetways and Marshallers Custom static aircraft, covering all major airlines operating from KHOU Blended Ortho files covering the airport area. Custom night lighting. Custom ramp markings (airline and gate specific). Requirements:
X-Plane 10.40 (might work on older X-Plane 10 versions, not tested. X-Plane 9 not supported.) OpenSceneryX 3D_people_library MisterX_Library (Optional, but recommended) AutoGate by marginal for the moving jetways (Optional, but recommended) Alpilotx HD Mesh V2 Installation:
Install KHOU_Hobby V1.00 into “X-Plane 10/Custom Scenery/“ Install Houston_downtown as a separate scenery folder into “X-Plane 10/Custom Scenery/“ (Optional) Install OpenSceneryX 2.0.0 if you haven’t already. Get it at http://www.opensceneryx.com/
Credits/Programs Used:
Thomas W, is without a doubt the person who made this airport what it is now. His 3d work is outstanding. Thanks again Tom!! Justin aka MisterX, without his dedication to this hobby this project would have taken twice the time it did to complete. Also thanks for answering all of my dumb questions.
AutoGate, GT and FS2Xplane by marginal.
WED and X-Plane 10 by Laminar Research.
John Shaddox for allowing me to include his converted downtown Houston.
Sketchup
USGS for the orthos
Ortho Magix
Known Issues:
Hobby is still in the process of its modernization program. This scenery is up to date and accurate as of March 2016.256 downloads
0 comments
Submitted
-
KDAL Dallas Love Field 1.0
By 3rdwatch
This is detailed scenery for Dallas Love Field KDAL.
Dallas Love Field (IATA: DAL, ICAO: KDAL) is a city-owned public airport 6 miles (10 km) northwest of downtown Dallas, Texas. It was Dallas' main airport until 1974 when Dallas/Fort Worth International Airport (DFW) opened.
The corporate headquarters for Southwest Airlines is located at Love Field. The airport is also a focus city for Southwest as well as for Virgin America and Delta Airlines. Seven full service fixed base operators (FBOs) provide general aviation service: fuel, maintenance, hangar rentals, and charters.
A special thanks to Tom aka tsw66. He should be considered a coauthor and deserves a ton of credit for helping me complete this project.
Also as always thanks to Justin aka MisterX. X-plane is a better place due to his work.
Please read included readme file.
382 downloads
Submitted
-
Real Land Israel
By ixpt
Real Land Israel is an on going project to populate the country , as real as it could be.
A while ago we released V0.7 of this project , however we decided to organize things so that there will be 3 parts of the project: The middle part of the country , the northern one and eventually the southern part.
V 0.7W focus is on the middle part mainly to cover all Ben Gurion Intl (LLBG) airport approaches and departures , fully covered with thousands of hand placed custom autogen and hundreds of Land Marks in the area.
More over , we included 2 heliports In "Ichilov" and "tel hashomer" hospitals , and a BETA version of Sde Dov (LLSD) which will be enhanced in the future.
Eventually , our goal is to cover CVFR routes around the country and also some main local airports.
Before Installation
- This project should be used with *64BIT* version only due to memory limits in the 32BIT one.
- Please remove any scenery for Israel , including the former Version of this project.
- Open Scenery X is *required* (The newest version from 30 May 2015!!) : http://www.opensceneryx.com/
- Make sure you have the last stable version of Xplane
- (Recommended but not required) Enhanced street lights :
- See included documentation for additional recommended enhancements to find the download link for the photoreal.
Download Links:
Airports: http://www.mediafire.com/download/qbn831pkrcjcpck/Airports.zip
Mesh: http://www.mediafire.com/download/370jcugxlw4pr74/IXPT+Israel+Mesh.zip
Autogen: http://www.mediafire.com/download/oxa7a3rk7n3zr0g/IXPT+AutogenW.zip
Landmarks: http://www.mediafire.com/download/4s36o9s7wfwlke2/IXPT+Israel+Landmarks.zip
IXPTeam Library: http://www.mediafire.com/download/u8hyaco06wazfuq/IXPTeam_Library.zip
Installation
- Download All the present folders
- Open every .zip file , and drag it's content to Custom Scnery.
- Load Xplane , so that it will automatically add the extensions inside the Scenery_Packs.ini
- Quit Xplane and open the Scenery_Packs.ini file and make sure that the order is correct (otherwise you may have many missing buildings) ;
SCENERY_PACK Custom Scenery/IXPT Sde Dov LLSD/
SCENERY_PACK Custom Scenery/IXPT Tel Hashomer LLSM/
SCENERY_PACK Custom Scenery/IXPT Sourasky LLIC/
SCENERY_PACK Custom Scenery/IXPT Israel Landmarks/
SCENERY_PACK Custom Scenery/IXPT AutogenW/
SCENERY_PACK Custom Scenery/IXPTeam_Library/
SCENERY_PACK Custom Scenery/OpenSceneryX/
SCENERY_PACK Custom Scenery/IXPT Photoscenery/
SCENERY_PACK Custom Scenery/IXPT Israel Mesh/
Performance
Please note that this project is meant to be used with modern hardware , just like Xplane when you use it in high settings.
Our recommendation is to run this project with HDR ON.
The first thing that you should check is your VRAM consumption , focusing on the textures resolution , this project may consume A LOT of video memory.
These are our suggestions based on our tests , however it may vary because it's not an accurate science:
- If you have a 6GB+ card you can use "Extreme" AND "compress textures to save Vram" OFF
- If you have a 4GB+ card you can use "Extreme" AND "compress textures to save Vram" ON
- If you have a 2GB+ card you can use "Very High" AND "compress textures to save Vram" OFF
- If you have a 1GB+ card you can use "high" AND "compress textures to save Vram" ON
If you have less than 1GB of Vram it's not recommended to run this project.
Known Issues
- Sometimes , even though you didn't exceed your Vram limit , when first loading Xplane frames will go up slowly and then get stuck on ~10FPS.
It's NOT a bug in our project , we think it may be related to Xplane itself , however you can wait a couple of minutes to get those lost frames , or you can go to your Rendering settings , change the AA settings , go back to the flight , and then again in your Rendering settings you can go back to your original AA.
- Some parts of the ground are censored/pixelated , it's *NOT * a bug.
When we will release airports , we will enhance the censored/pixelated areas around them.
Before reporting a BUG , please make sure you perfectly followed all the instructions.
Credits and supports given by other developers
- Tomer Haim for some of the landmarks that were converted from an existing MSFS scenery
- Israeli Scenery Projects team for some of the landmarks that were converted from an existing MSFS scenery
- Niv Tesler for some of the landmarks that were converted from an existing MSFS scenery
- Bar Rodoy for some of the landmarks that were converted from an existing MSFS scenery
- FlyByGuy for his wonderful objects that he is uploading every day
- This project is done by Israeli Xplane Team (IXPT)
Our next projects
- Real Land Israel 08W
- Another airport in the country
Pictures:
https://www.flickr.com/photos/105003633@N02/sets/72157659093263029/
We hope you ENJOY!
By IXPT
94 downloads
0 comments
Updated
-
Ben Gurion Airport LLBG
By ixpt
Fix for cut asphalt
Some folks had a problem which caused the asphalt to be cut at the +31+034.dsf and +32.034.dsf meeting point (RW21 Vacating area)
Donwload: http://www.mediafire.com/download/f9dwdj4fw5i5ns6/Earth+nav+data.zip
and drop the folder inside the .zip file to the scenery's folder , and agree to replace the existing folder.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ben Gurion V2* by IXPT is the most accurate and detailed rendition of the real thing.
Features
- Custom objects with UHD textures and specular effects
- HD ground textures with many kinds of asphalt and concrete
- Accurate and updated layout ; in real life the airport is changing , we will continue to update it of course!
- 3D vegetation
- Custom Ground traffic with Marginal's ground traffic plugin
- Working VDGSs and animated marshalls for gates and hard stands respectively with Marginals' Autogate plugin (NO working jetways)
- Fully compatible with "Real Land Israel" as well as the default scenery
Before Installation
- Please remove any scenery for this airport.
- Open Scenery X is *required* (The newest version from 30 May 2015!!) : http://www.opensceneryx.com/
- Make sure you have the last stable version of Xplane
- (Recommended but not required) Real Land Israel by IXPT:
- (Recommended but not required) Marginal's Autogate plugin: http://forums.x-plane.org/index.php?app=downloads&showfile=5038
- (Recommended but not required) to get an accurate and the newest approaches to the airport , you'll need to purchase AIRAC: https://www.navigraph.com/
Installation
- Open the zip file and drag it's content to Custom Scenery
- Please make sure that within the scenery_packs.ini file
SCENERY_PACK Custom Scenery/IXPT Ben Gurion LLBG/
is *HIGHER* than
SCENERY_PACK Custom Scenery/Global Airports/
- If you are using it with Real Land Israel , apply the previous step , so "IXPT Ben Gurion LLBG" is higher than Real Land Israel folders.
For conclusion , this is how it should look like if you are using it with Real Land Israel
SCENERY_PACK Custom Scenery/IXPT Ben Gurion LLBG/
SCENERY_PACK Custom Scenery/IXPT Sde Dov LLSD/ SCENERY_PACK Custom Scenery/IXPT Tel Hashomer LLSM/ SCENERY_PACK Custom Scenery/IXPT Sourasky LLIC/ SCENERY_PACK Custom Scenery/Global Airports/ SCENERY_PACK Custom Scenery/IXPT Israel Landmarks/ SCENERY_PACK Custom Scenery/IXPT AutogenW/ SCENERY_PACK Custom Scenery/IXPTeam_Library/ SCENERY_PACK Custom Scenery/OpenSceneryX/ SCENERY_PACK Custom Scenery/IXPT Photoscenery/ SCENERY_PACK Custom Scenery/IXPT Israel Mesh/
Performance
This airport is highly detailed , so expect it'll affect your FPS , however it mostly depends on your computer and Xplane's settings.
Known Issues
Terminal 1 building is not textured yet , we will get to it in a future update.
Credits and Support given by other developers
- MisterX6 , for some of the objects in this scenery.
- Niv Tesler for the new tower and swissport objects
- Marginal for the working VDGS and marshalls
- This scenery is done by israeli Xplane Team (IXPT)
Our next projects
- Real Land Israel 08W
- Another airport in the country
Pictures
https://www.flickr.com/photos/105003633@N02/sets/72157659486762602/
347 downloads
0 comments
Updated
-
EDLV Niederrhein Weeze Airport
By LPNils
A rebuilt scenery of Niederrhein airport in Northrhein Westfalia, Germany. Located just along the border with the Netherlands this airfield started its life in 1953 as RAF Laarbruch, supporting the Royal Air Force's defense of western Europe during the cold war. The RAF left the base in 1999 and preparation began for reopening as Airport Niederrhein in 2003.
The old main hangar (used as aircraft factory in the 30s and 40s) is nowadays used as the terminal. Most of the old RAF 4 Squadron dispersal area is in use as general aviation parking.
This scenery comes with many custom buildings, library objects and a big orthophoto. I will continue to add or modify details over time.
Required Libraries
OpenScenery X
Handy Objects Library
RD_Library
RE_Library
3D People Library
AutoGate Plugin
Ru_Scenery
If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click).
Included Objects by other developers
Cooper Airport Rotating Beacon
Mkiii
Eurpean Airport Objects
BS2001 (now also available as a library)
I welcome feedback.
Happy landings!
61 downloads
0 comments
Updated